458 sonuçtan 37-48 arası gösteriliyor
CUAV H16 Receiver Unit RC Drone Parts HD Video Transmission System
Yurtdışı Tedarik
CUAV High Precision RM3100 Magnetic C-Compass External Compass For Pixhawk And PX4
Yurtdışı Tedarik
| Weight |
13g |
|---|---|
| Dimensions |
20 × 10 × 10 cm |
| C-Compass Options |
C-Compass * 3 Pcs, C-Compass & NEO 3 GPS / Set, C-Compass & NEO 3 Pro GPS / Set, C-Compass & NEO 3X GPS / Set |
| Sensor |
RM3100 |
| MCU |
STM32F412 |
| Software Architecture |
CUAV M4C |
| Protocol |
DroneCan/UAVCAN |
| Accuracy |
0.25° (effective value) |
| Repetition Accuracy |
0.05° |
| Controller Type |
PX4/ArduPilot (CUAV/Pixhawk etc.) |
| Operating Voltage |
4.75-5.3V |
| Operating Temperature |
-20～80℃ |
| Communication Rate |
2Mb |
| Refresh Rate |
80Hz |
| Noise |
15nT |
| Resolution |
0.01° |
| Sensitivity |
13nT |
| Range |
-800 μTto+800 μT |
| Interface |
GHR-04V-S |
| Operating Humidity |
5%～95%(non-condensing) |
| Casing Material |
Aluminum alloy |
| Size |
31.5×31.0×14.0mm |
| Versiyon |
C-Compass-Options: C-Compass * 3 Pcs ,C-Compass-Options: C-Compass & NEO 3 GPS / Set ,C-Compass-Options: C-Compass & NEO 3 Pro GPS / Set ,C-Compass-Options: C-Compass & NEO 3X GPS / Set |
CUAV IST8 External Compass of GPS Module | PX4 Geomagnetic Sensor IST8310
Yurtdışı Tedarik
| Ağırlık | 0.5 lbs |
|---|---|
| Weight |
0.5 kg |
| Dimensions |
20 × 10 × 10 cm |
| IST8 Compass Options |
IST8 Compass V5+ version * 3 Pcs, IST8 & NEO 3 GPS / Set, IST8 & NEO 3 Pro GPS / Set, IST8 & NEO 3X GPS / Set |
| Rated voltage |
10 ~ 60V（3 ~ 14S Lipo) |
| Current(MAX) |
60A |
| Current Accuracy |
±0.2A |
| Voltage Accuracy |
±0.1V |
| 12V OUT |
4A |
| 5V OUT |
2A |
| FC power |
5A |
| Battery |
XT60 |
| 12V OUT5V OUTFC Power |
GH1.25 |
| Versiyon |
Ist8-Compass-Options: IST8 Compass V5+ version * 3 Pcs ,Ist8-Compass-Options: IST8 & NEO 3 GPS / Set ,Ist8-Compass-Options: IST8 & NEO 3 Pro GPS / Set ,Ist8-Compass-Options: IST8 & NEO 3X GPS / Set |
CUAV MS4525 Airspeed Sensor with Pitot Tube
Yurtdışı Tedarik
| Ağırlık | 1085 lbs |
|---|---|
| Weight |
0.3 kg |
| Dimensions |
20 × 10 × 10 cm |
| MS4525 Airspeed Sensor Options |
MS4525-PIX Version * 2 Pcs, MS4525-V5+and X7 Version * 2 Pcs, MS4525-V6X Version * 2 Pcs, MS4525 & NEO 3 GPS / Set, MS4525 & NEO 3 Pro GPS / Set, MS4525 & NEO 3X GPS / Set |
| Sensor |
MS4525 |
| Range |
±6895Pa |
| Accuracy |
±0.25％ SPan |
| Firmware Support |
ArduPilot, PX4 |
| Interface |
I2C |
| Input Voltage |
4.7 ~ 5.2V |
| Working Temperature |
-10 ~ 85 ℃ |
| Versiyon |
Ms4525-Airspeed-Sensor-Options: MS4525-PIX Version * 2 Pcs ,Ms4525-Airspeed-Sensor-Options: MS4525-V5+and X7 Version * 2 Pcs ,Ms4525-Airspeed-Sensor-Options: MS4525-V6X Version * 2 Pcs ,Ms4525-Airspeed-Sensor-Options: MS4525 & NEO 3 GPS / Set ,Ms4525-Airspeed-Sensor-Options: MS4525 & NEO 3 Pro GPS / Set ,Ms4525-Airspeed-Sensor-Options: MS4525 & NEO 3X GPS / Set |
CUAV Multi-Copter Package | X7+ Controller NEO 3 GPS P8 Telemetry One Set
Yurtdışı Tedarik
| Ağırlık | 1070 lbs |
|---|---|
| Weight |
2 kg |
| Dimensions |
30 × 30 × 20 cm |
| Processor |
STM32H743(Arm Cortex -M7,480MHz, 2MB FLASH, 1MB RAM) |
| Accelerometer |
ICM-42688-P / ICM-20689 / ICM-20689 |
| Gyroscope |
ICM-42688-P / ICM-20689 / ICM-20689 |
| Compass |
RM3100 |
| Barometer |
MS5611 *2 |
| UART |
5 |
| I2C |
6 (2 interfaces are integrated in GPS&SAFETY&UART4) |
| PWM OUT |
14 ( M1~M12 Support DSHOT protocol) |
| RC IN |
1 (Support PPM SBUS DSM) |
| RSSI |
PWM or 3.3V analog voltage |
| CAN |
2 |
| Power IN |
2 (Power A for ADC protocol, Power C for CAN protocol) |
| Safety Switch |
1 |
| GPS |
2 |
| ADC |
1 |
| DEBUG |
1 |
| JATG |
1 |
| USB |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
| Size |
77.0 × 45.5 × 39.0mm |
| Working Frequency |
840 ~ 845MHz |
| Spreading Method |
Frequency Hopping/Fixed Frequency、Transparent transmission、GMSK、2GFSK、4GFSK、QPSK |
| Forwarding Error Detection |
Hamming, BCH, Golay, Reed Solomon, Viterbi |
| Error Detection |
32 bits of CRC, ARQ |
| Range |
Reference distance: 40km(The transmission distance is different under different environments/ configurations; please refer to actual use) |
| Sensitivity |
-109 dBm @ 115.2 kbps-108 dBm @ 172.8 kbps-106 dBm @ 230.4 kbps |
| Transit Power |
100 ~ 1000mw(20~30dBm）Default：1000mw |
| Antenna Gain |
3dBi |
| Serial Interface |
3.3V CMOS TTL |
| Link Rate |
345kbps Max |
| Baud Rate |
300bps to 230kbps(default:57600) |
| Operating Modes |
Point-to-Point, Relay Mode |
| Input Voltage |
12 ~ 60V |
| Power Consumption |
Sleep：< 1mA (Future)Idle：20mARx：45mA to 98mATx Peak：2A |
| Interface |
Antenna: SMA inner needleSerial: GHR-06V-SUSB: Type-C POWER |
| Operation Temperature |
-40 ~ 85 ℃ |
| RGB Drive |
NCP5623 |
| Buzzer |
Passive buzzer |
| GNSS Receiver |
UBLOX NEO M9N |
| Number of Concurrent GNSS |
4(BDS、GALILEO、GLONASS、GPS) |
| Frequency Band |
GPS: L1C/AGLONASS: L10FBDS: B11GALILEO: E1B/C |
| GNSS Augmentation System |
SBAS: WAAS, EGNOS, MSASQZSS:L1s(SAIF)other: RTCM3.3 |
| Horizontal Accuracy |
2.0m |
| Speed Accuracy |
0.05m/s |
| Nav.update rate |
25Hz(Max) |
| Acquisition |
Cold start:24sHot start:2sAided start:2s |
| Number of Saellites(MAX) |
32+ |
| Protocol |
UART+IO+l2C |
| Port Type |
GHR-10V-S |
| Supported Controller |
CUAV series, Pixhawk series |
| Wave Filtering |
SAW+LNA+SAW |
| Anti-Lectromagnetic/Radio Frequency Interference |
EMI+RFI |
| Upgrade Firmware |
Support |
| Support Control Type |
ArduPilot/PX4*(PX4 is stillworking hardto adapt to the clock) |
| Operating Temperature |
-10～70℃ |
CUAV NEO 3 GPS Modülü
Yurtdışı Tedarik
| Ağırlık | 1070 lbs |
|---|---|
| Weight |
0.5 kg |
| Dimensions |
10 × 10 × 5 cm |
| NEO 3 GPS MOQ Options |
NEO 3 * 2pcs, NEO 3 * 5pcs, NEO 3 * 10pcs |
| Protocol |
UART/IO/I2C |
| GNSS Receiver |
UBLOX NEO M9N |
| GNSS concurrently |
beidou,galileo,glonass,gps |
| positioning accuracy |
0.7M |
| Compass |
IST8310 |
| Nav.update rate |
25MHZ |
| Remote Control Peripherals/Devices |
GPS |
| For Vehicle Type |
Airplanes |
| Plastic Type |
ABS |
| RGB Drive |
NCP5623 |
| Buzzer |
Passive buzzer |
| Safety Switch |
Physical button |
| Number of Concurrent GNSS |
4(BDS、GALILEO、GLONASS、GPS) |
| Frequency Band |
GPS: L1C/AGLONASS: L10FBDS: B11GALILEO: E1B/C |
| GNSS Augmentation System |
SBAS: WAAS, EGNOS, MSASQZSS:L1s(SAIF)other: RTCM3.3 |
| Horizontal Accuracy |
2.0m |
| Speed Accuracy |
0.05m/s |
| Acquisition |
Cold start:24sHot start:2sAided start:2s |
| Number of Saellites(MAX) |
32+ |
| Sensitivity |
Tracking and nav-167dBmCold start Hot start-148dBmReacquisition-160dBm |
| Port Type |
GHR-10V-S |
| Supported Controller |
CUAV series, Pixhawk series |
| Wave Filtering |
SAW+LNA+SAW |
| Anti-Lectromagnetic/Radio FrequencyInterference |
EMI+RFI |
| Upgrade Firmware |
Support |
| Support Control Type |
ArduPilot/PX4*(PX4 is stillworking hard to adapt to the clock) |
| Input Voltage |
4.7-5.2V |
| Operating Temperature |
-10～70℃ |
| Size |
60×60×16mm |
| Versiyon |
Neo-3-Gps-Moq-Options: NEO 3 * 2pcs ,Neo-3-Gps-Moq-Options: NEO 3 * 5pcs ,Neo-3-Gps-Moq-Options: NEO 3 * 10pcs |
CUAV NEO 4 NANO MINI GNSS MODULE U-BLOX M10 GPS for Drone
Yurtdışı Tedarik
| Ağırlık | 1080 lbs |
|---|---|
| Weight |
0.5 kg |
| Dimensions |
10 × 10 × 5 cm |
| Receiver Type |
u-blOx MIA-M10Q |
| Processor |
STM32H5 Arm Cortex-M33 250 MHz |
| Compass |
IIS2MDC |
| Frequency Band |
GPS: L1 C/AGLONASS: L1OFBDS: B11/B1CGalileo: E1B/C |
| Augmentation Systems |
SBAS: EGNOS, GAGAN, MSAS, WAAS, BDSBAS, KASS and SouthPANQZSS: L1S (SLAS) |
| Number of Concurrent GNSS |
4(BDS, Galileo, GLONASS, GPS) |
| Oscillators |
TCXO |
| Acquisition |
Cold Start: 27 s I Hot Start: 1 s I Aided Start: 1 s |
| Nav. Update Rate |
Up to 10 Hz(4 concurrent GNSS)Up to 25 Hz (single GNSS) |
| Horizontal Position Accuracy |
1.5 m CEP |
| Signal Integrity |
RF interference and jamming detection and reportingdetection and reporting |
| Wave Filtering |
SAW+LNA+SAW+LNA |
| Anti Electromagnetic/ Radio Frequency Interference |
EMI+RFI |
| Protocol |
DroneCAN |
| Upgrade Firmware |
Support |
| Firmware |
CUAV M4C GNSS |
| Data Interface |
GHR-04V-S |
| Product Options |
Choose an optionNEO 4 Nano GNSS Module * 2PcsNEO 4 Nano & Pixhawk V6X V2 ControllerNEO 4 Nano & 7-Nano V2 ControllerClear |
| Size |
34 * 20 * 14.5 mm |
| Input Voltage |
4.7～5.2V |
| Operating Temperature |
-10 ℃ ~ +80 ℃ |
| CUAV Products |
NEO 3 |
| Sensor |
Compass:IST8310 |
| RGB Driver |
NCP5623C |
| Buzzer |
Passive Buzzer |
| Safety Switch |
Physical Button |
| GNSS Receiver |
u-blox M9N |
| Number ofConcurrent GNSS |
4(BDS、Galileo、GLONASS、GPS) |
| GNSSAugmentationSystem |
SBAS:WAAS,EGNOS,MSASQZSS:L1s(SAIF)Other: RTCM3.3 |
| HorizontalAccuracy |
2.0m(Highest measured value is 0.7m) |
| Speed Accuracy |
0.05m/s |
| Number ofSatellites(MAX) |
32+ |
| Sensitivity |
Tracking &Nav:-167dBmCold start &Hot start:-148dBmReacquisition:-160dBm |
| Anti Electromagnetie/Radio FrequencyInterference |
EMI+RFI |
| SupportedController |
CUAV seriesPixhawk series |
| Port Type |
GHR-10V-S |
| OperatingTemperature |
-10～+70℃ |
| Protection Level |
一 |
| Versiyon |
Product-Options: NEO 4 Nano GNSS Module * 2Pcs ,Product-Options: NEO 4 Nano & Pixhawk V6X V2 Controller ,Product-Options: NEO 4 Nano & 7-Nano V2 Controller |
CUAV NEO 4 SE GPS Module U-BLOX M10 GNSS
Yurtdışı Tedarik
| Ağırlık | 1080 lbs |
|---|---|
| Weight |
0.5 kg |
| Dimensions |
10 × 10 × 5 cm |
| Product variants |
MIA-M10Q |
| Built-in processor |
STM32H5 Arm Cortex-M33 250 MHz |
| GNSS |
BeiDou, Galileo, GLONASS, GPS / QZSS |
| Oscillators |
TCXO |
| Acquisition 1 |
Cold start: 27 sAided start: 1 sHot start: 1 s |
| Nav.Update Rate |
25Hz(Max) |
| Horizontal Position Accuracy |
1.5 mCEP |
| Communication protocol |
DroneCAN |
| Run firmware |
CUAV M4C PMU2 |
| Data Interface |
GHR-04V-S |
| Operating Temperature |
-10 ℃ ~ +80 ℃ |
| Product Options |
Choose an optionNEO 4 SE GPS * 2PcsNEO 4 SE & Pixhawk V6X V2 ControllerNEO 4 SE & 7-Nano V2 ControllerClear |
| Receiver Type |
u-blox MIA-M10Q |
| Processor |
STM32H5ArmCortex-M33250 MHz |
| Compass |
IIS2MDC |
| Frequency Band |
GPS: L1 C/AGLONASS: L1OFBeiDou: B11/B1CGalileo: E1B/C |
| AugmentationSystems |
SBAS: EGNOS, GAGAN, MSAS, WAAS, BDSBAS, KASS, and SouthPANQZSS: L1S (SLAS) |
| Number of Concurrent GNSS |
4(BeiDou, Galileo, GLONASS, GPS) |
| Acquisition |
Cold Start: 27 s I Hot Start: 1 s I Aided Start: 1 s |
| Sensitivity |
Tracking and Nav: -167 dBmReacquisition: -160 dBmCold Start: -148 dBmHot Star: -159 dBm |
| Signal Integrity |
RF interference and jamming detection and reporting, spoofing detection and reporting |
| Wave Filtering |
SAW+LNA+SAW+LNA |
| Anti Electromagnetic/Radio FrequencyInterference |
EMI+RFI |
| Protocol |
DroneCAN |
| Upgrade Firmware |
Support |
| Firmware |
CUAV M4C GNSS |
| Size |
60 × 60 x 16.1 mm |
| Input Voltage |
4.7～5.2V |
| CUAV Products |
NEO 3 |
| Sensor |
Compass:IST8310 |
| RGB Driver |
NCP5623C |
| Buzzer |
Passive Buzzer |
| Safety Switch |
Physical Button |
| GNSS Receiver |
u-blox M9N |
| Number ofConcurrent GNSS |
4(BDS、Galileo、GLONASS、GPS) |
| GNSSAugmentationSystem |
SBAS:WAAS,EGNOS,MSASQZSS:L1s(SAIF)Other:RTCM3.3 |
| HorizontalAccuracy |
2.0m(Highest measured value is 0.7m) |
| Speed Accuracy |
0.05m/s |
| Number ofSatellites(MAX) |
32+ |
| Anti Electromagnetie/Radio FrequencyInterference |
EMI+RFI |
| SupportedController |
CUAV seriesPixhawk series |
| Port Type |
GHR-10V-S |
| OperatingTemperature |
-10～+70℃ |
| Protection Level |
一 |
| Versiyon |
Product-Options: NEO 4 SE GPS * 2Pcs ,Product-Options: NEO 4 SE & Pixhawk V6X V2 Controller ,Product-Options: NEO 4 SE & 7-Nano V2 Controller |
CUAV New C-ADB Secondary Development Pixhawk Debug Debugging Adapter
Yurtdışı Tedarik
CUAV NEW C-RTK 2 high precision Multi-Star Multi-Frequency RTK PPK GNSS Module
Yurtdışı Tedarik
| Ağırlık | 39 lbs |
|---|---|
| Processor |
H7 |
| Support 1 |
Supports both RTK and PPK |
| Supports 2 |
Hotshoe Trigger |
| IMU |
Build in high precision IMU |
| Data interface |
USBX1,UART X2 |
| Frequency |
Muti -star Muti-frequency |
| Protocol |
Supports UAVCAN Protocol |
| Speed |
4M/s Reading speed |
| Radio Control Style |
RC Hobby |
| Receiver |
ZED-F9P |
| Channel |
184 |
| FLASH |
2M |
| RAM |
1M |
| Acce & Gyro |
ICM-20689 |
| Compass |
RM3100 |
| Barometer |
ICP10111 |
| TF Card |
32G(Max) |
| PPK |
Support |
| RTK |
Support |
| GNSS System |
GPS:L1C/A,L2CGLONASS:L10F,L2OFGALILEO:E1B/C,E5bBDS:B11,B2I |
| Enhanced System |
QZSS:L1C/A,L2C,L1SSBAS:L1C/A |
| Concurrent GNSS |
4 |
| Nav Rate |
RTK:20Hz(Max)PPK:25Hz(Max)default:5Hz |
| Convergence Time |
RTK<10s |
| Accuracy (RMS) |
RTKLevel: 0.01m+1ppm(RMS)RTKVertical: 0.02m+1ppm(RMS)GPS: 1.5m(RMS) |
| Acquisition |
Cold start: 24sHot start: 1sReacquisition: 2s |
| Sensitivity |
Tracking &Nav:-167dBmCold start:-148dBmHot start:-157dBmReacquisitio:-160dBm |
| Anti-Spoofing |
Advanced anti-spoofing algorithms |
| Time Pulse |
0.25Hz~10Mhz(Configurable) |
| Anti-Jamming |
Active CW detection and removal onboard band pass filter |
| Controller |
Compatible with controllers running ArduPilot/ PX4 firmware |
| Coordinate System |
WGS84 |
| Interface |
Hotshoe×1; Shutter in×1; Shutter out×1; Type-C×1; F9P USB×1; UART×1; CAN×1; MMCXAntenna×1 |
| DCIN |
4.5～6V |
| Operating Temperature |
-20～85℃ |
| Size |
56.0×33.0×16.5mm |
| Weight |
39g |
CUAV New C-RTK 2HP Dual Antenna Centimeter Position GNSS Heading Module
Yurtdışı Tedarik
| Ağırlık | 2085 lbs |
|---|---|
| Weight |
40g |
| Dimensions |
20 × 10 × 10 cm |
| Processor |
STM32F4 |
| Sensor |
Compass – RM3100 Grro/ACC – ICM42688 |
| Channels |
1408 channels |
| GNSS |
BDS/GPS/GLONASS/Galileo/QZSS |
| Estimate yaw accuracy |
0.2 degrees/1m (distance between antenna 1 and antenna 2) |
| Max star |
Single : 28 + RTK:50 + |
| Positioning speed |
Cold start <30s/auxiliary start <5s |
| Data refresh rate |
5Hz (default); Max 20Hz |
| Data format |
RTCM3.X |
| C-RTK 2HP Options |
Choose an optionRTK 2HP setRTK 2HP with RTK 9Ps BasePixhawk V6X V2 Controller & C-RTK 9Ps Base Unit & C-RTK 2HP Rover Unit7-Nano V2 Controller & C-RTK 9Ps Base Unit & C-RTK 2HP Rover UnitClear |
| MCU |
STM32F412(32Bit ArmCortex⁶-M4, 100MHz,512KBFLASH,256KB RAM) |
| Compass |
RM3100 |
| Receiver |
High precision GNSSSoC |
| Antenna 1(Master) |
BDS:B11、B2I、B3IGPS:L1C/A、L2P/L2C、L5GLONASS:L1、L2GALILEO:E1、E5a、E5bQzSS:L1、L2、L5 |
| Antenna 2 |
BDS:B11、B2I、B3IGPS:L1C/A、L2CGLONASS:L1、L2Geo:E1、E5bQzSS:L1、L2GPS:L1C/A、L2CGLONASS:L1、L2GALILEO:E1、E5bQzSS:L1、L2 |
| Position Accuracy(RMS) |
Single Point 1.5m(Horizontal)/ 2.5m(Vertical)DGPS: 0.4m+1PPM(Horizontal/ 0.8m+1PPM(Vertical)RTK: 0.8cm+1PPM(Horizontal)/ 1.5cm+1PPM(Vertical) |
| Acquisition |
Cold start<30sInitialization time<5s |
| Data Update Rate |
UP to 20Hz (default:5Hz) |
| Differential Data |
RTCM3.X |
| Data Protocol |
DroneCAN/ NMEA |
| Sport |
Antenna*2、CAN*1、UART*1、DSU*1、USB*1 |
| Operating Voltage |
4.7～5.2V |
| Operating Temperature |
-20～85℃ |
| Size |
50×37×17mm |
| Versiyon |
C-Rtk-2Hp-Options: RTK 2HP set ,C-Rtk-2Hp-Options: RTK 2HP with RTK 9Ps Base ,C-Rtk-2Hp-Options: Pixhawk V6X V2 Controller & C-RTK 9Ps Base Unit & C-RTK 2HP Rover Unit ,C-Rtk-2Hp-Options: 7-Nano V2 Controller & C-RTK 9Ps Base Unit & C-RTK 2HP Rover Unit |
CUAV New Flightcase 24GHz Miniature UAV Drone Altimeter Radar ISTRA24
Yurtdışı Tedarik