Stoktan Teslim Ürünler
Stoktan Teslim ürünlerimiz için %10 indirim
CUAV 7-Nano V2 Open Source Controller Drone Accessories Kits
Stoktan Teslim
| Weight |
33g |
|---|---|
| Dimensions |
10 × 10 × 5 cm |
| Processor |
STM32H753(Arm Cortex -M7,480MHz, 2MB FLASH) |
| Acce&Gyro |
IIM-42652/BMI088 |
| Compass |
IST8310 |
| UART |
5 |
| 12C |
3 |
| PWM Output |
14 |
| PWM Level |
3.3V/5V(8 CH) |
| RC IN |
1 |
| RSSI |
Support |
| Size |
30.5×25.5×31.8mm |
| Accessories Kit Options |
Choose an option7-Nano V2 Controller Standard7-Nano V2 Controller with PDB Power Module7-Nano V2 Controller with NEO 3X GNSS Module7-Nano V2 Controller with NEO 3 Pro GNSS Module7-Nano V2 Controller with NEO 4 SE GNSS Module7-Nano V2 Controller with NEO 4 Nano GNSS Module7-Nano V2 Controller with C-RTK 9 Ps(Rover Unit, Base Unit, Stand Combo)7-Nano V2 Controller with C-RTK 9 Ps(Base Unit) & C-RTK 2HP(Rover Unit)Clear |
| Barometer |
ICP-20100/BMP581 |
| I2C |
3 |
| PWM OUT |
14 (Configurable for 3.3V / 5V) |
| CAN BUS |
2 |
| Power IN |
1 |
| Safety Switch |
1 |
| GPS 2 |
1 |
| ADC |
ADC3.3 & ADC6.6 |
| Debug |
FMU Debug |
| USB |
Type-C |
| Ethernet |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
| Detection Current(MAX) |
79.2 A |
| BEC OUT |
5.3V / 4A |
| Voltage and Current Accuracy |
±0.2V / 0.5A |
| Splitter |
Divided into six |
| Interfaces |
XT60 / GH1.25 6Pin |
| Main processor |
STM32H753 |
| Power |
1 |
| GPS&Safety |
1 |
| GPS2 |
1 |
| TELEM |
2 |
| TF card slot |
1 |
| Power Module |
7-Nano PDB |
| Versiyon |
Accessories-Kit-Options: 7-Nano V2 Controller Standard ,Accessories-Kit-Options: 7-Nano V2 Controller with PDB Power Module ,Accessories-Kit-Options: 7-Nano V2 Controller with NEO 3X GNSS Module ,Accessories-Kit-Options: 7-Nano V2 Controller with NEO 3 Pro GNSS Module ,Accessories-Kit-Options: 7-Nano V2 Controller with NEO 4 SE GNSS Module ,Accessories-Kit-Options: 7-Nano V2 Controller with NEO 4 Nano GNSS Module ,Accessories-Kit-Options: 7-Nano V2 Controller with C-RTK 9 Ps(Rover Unit, Base Unit, Stand Combo) ,Accessories-Kit-Options: 7-Nano V2 Controller with C-RTK 9 Ps(Base Unit) & C-RTK 2HP(Rover Unit) |
Cuav CUAV C-RID Drone Remote ID Broadcast Module
Stoktan Teslim
| Ağırlık | 475.2 lbs |
|---|---|
| Weight |
0.0155 kg |
| Dimensions |
30 × 38 × 10 cm |
| C-RID Remote ID Options |
C-RID * 3 Pcs, C-RID & NEO 3 GPS / Set, C-RID & NEO 3 Pro GPS / Set, C-RID & NEO 3X GPS / Set |
| Processor |
Xtensa32-bit LX7dual-coreprocessor |
| Transmit Power |
20dBm |
| Communication Frequency |
2.4GHz |
| Communication Mode |
Wi-Fi or Bluetooth Broadcast |
| Range |
>300m |
| Protocol |
DroneCAN/ UART(MAVLink) |
| Firmware |
ArduRemotelD (Support OTA Online Upgrade) |
| Ports |
1xCAN （4-pinGH1.25）1xUART（4-pinGH1.25)1×ANT(MMCX) |
| Shell Material |
Aviation Aluminum |
| Operating Voltage |
4.7~5.2V |
| LED (main) Status |
Off:Not connected or not workingConstant Red:Configuration is not completed(disarming conditionsarenotmet)Constant Green:Configuration is successful,unlockable |
| Size |
Main: 24×38x10mmIncluding Fixing Hole: 38x38x10mm |
| Versiyon |
C-Rid-Remote-Id-Options: C-RID * 3 Pcs ,C-Rid-Remote-Id-Options: C-RID & NEO 3 GPS / Set ,C-Rid-Remote-Id-Options: C-RID & NEO 3 Pro GPS / Set ,C-Rid-Remote-Id-Options: C-RID & NEO 3X GPS / Set |
Cuav CUAV C-RTK 9Ps Positioning Module | High Precision GPS RTK GNSS Pixhawk
Stoktan Teslim
| Ağırlık | 30 lbs |
|---|---|
| Tool Supplies |
Assembly Category |
| Upgrade Parts/Accessories |
GPS |
| RC Parts & Accs |
Servo Accessories |
| Size |
32*48*12mm |
| Compass |
IST8310 |
| Remote Control Peripherals/Devices |
GPS |
| Position Accuracy |
RTK:0.01m+1ppm CEPGPS:1.5m CEP;SBAS:1.0m CEP |
| RTK Surveyin-time |
RTK<60s |
| Radio Control Style |
RC Hobby |
| C-RTK 9Ps options |
Choose an optionRover unit stand comboBase unit comboRover unit stand unit and base unitcomboC-RTK 9Ps & Pixhawk V6X V2 ControllerC-RTK 9Ps & 7-Nano V2 ControllerClear |
| Receiver |
184 channelZED-F9P(ublox) |
| GNSS |
GPS、BDS、GALILEO、GLONASS |
| Concurrent GNSS |
4 |
| GNSS Bands |
GPS-L1C/A,GPS-L2C,GLONASS-L10F,GLONASS-L2OF,GALILEO-E1B/C,GALILEO-E5b,BDS-B11,BDS-B2I,QZSS-L1CIA,QZSS-L2C, |
| Nav.update rate |
RTK20Hz; RAW25Hz; PVT25Hz (The maximum limit is related to the concurrency setting) |
| Convergence Time |
RTK<60s |
| Acquisition |
Cold start<24sHot start<1s |
| Sensitivity |
Tracking and nav-167dBmCold start-148 dBmHot start-157 dBmReacquisition -160 dBm |
| Anti-jamming |
Active CW detection and removal, Onboard band pass filter |
| Anti-spoofing |
Advanced anti-spoofing algorithms |
| Antenna Gain |
Rover:2dBi Base:5dBi |
| PPK |
Not Support |
| GPS Heading |
Support(requirestwo C-RTK9Ps);heading accuracy:0.4edg(reference value) |
| Base/Rover Role Swap |
Support |
| UART |
2 UART |
| USB |
1 |
| Protocols |
NMEA、UBX binary、RTCM 3.x |
| Operating voltage |
4.5~6V |
| Operating Temperature |
-40～85℃ |
| Weight |
30g(Module Only) |
| Versiyon |
C-Rtk-9Ps-Options: Rover unit stand combo ,C-Rtk-9Ps-Options: Base unit combo ,C-Rtk-9Ps-Options: Rover unit stand unit and base unitcombo ,C-Rtk-9Ps-Options: C-RTK 9Ps & Pixhawk V6X V2 Controller ,C-Rtk-9Ps-Options: C-RTK 9Ps & 7-Nano V2 Controller |
Cuav CUAV CAN PDB Multifunctional Drone Controller Baseboard
Stoktan Teslim
| Ağırlık | 200 lbs |
|---|---|
| Set |
CAN PDB Only, CAN PDB With V5+ Core, CAN PDB With X7+ Core, CAN PDB With X7+ Pro Core |
| Material |
Metal |
| Upgrade Parts/Accessories |
Flight controller |
| RC Parts & Accs |
Speed controller |
| Size |
89*42.5*33mm |
| Use |
Vehicles & Remote Control Toys |
| Technical parameters |
KV1100 |
| Remote Control Peripherals/Devices |
Remote Controller |
| Four-wheel Drive Attributes |
Battery |
| MCU |
STM32F412(32 Bit Arm® Cortex®-M4, 100MHz, 512KB FLASH, 256KB RAM) |
| Operating Voltage |
14 ~ 62V（4 ~ 15S Lipo) |
| Detection Current Range |
0 ~ 110A |
| Output Power(MAX) |
6000W（last 120s） |
| Stable Output Power(MAX) |
5500W |
| Core |
V5+ / X7+ / X7+ Pro CORE |
| Frame Type |
Plane/VTOL/Copter/Heli/Rover/Sub |
| Controller Firmware |
ArduPilot 4.0.0 and above firmwarePX4 1.11.0 and above firmware |
| Operating Temperature |
-20 ~ 100℃ |
| V_OUT |
5V(default)/7.4V/8.2V(4A） |
| Servo VCC |
5V(default)/7.4V/8.2V(8A） |
| 12V OUT |
4A(max) |
| USB |
1 |
| UART1 |
5(GPS/UART4/TELEM1/TELEM2/DEBUG) |
| CAN |
2 |
| I2C |
3 |
| SBUS/DSM IN |
1 |
| PPM IN |
1 |
| Servo |
14 |
| ADC3.3 |
1 |
| ADC6.6 |
1 |
| SBUS Outs |
1(This interface is invalid when using X7+/X7+pro core) |
| RSSI |
3.3V(Analog input) |
| DSU7 |
1 |
| Weight |
200g (including cable) |
| Wire Length |
30cm |
| Versiyon |
Set: CAN PDB Only ,Set: CAN PDB With V5+ Core ,Set: CAN PDB With X7+ Core ,Set: CAN PDB With X7+ Pro Core |
Cuav CUAV CAN PMU Lite Power Module | Open Source Drone Hardware
Stoktan Teslim
| Ağırlık | 20100 lbs |
|---|---|
| Processor |
STM32F103CEU6 |
| Input voltage |
10-62V (2-15S Lipo) |
| Maximum current |
90A |
| Voltage accuracy |
±0.15V |
| Current accuracy |
±0.2A |
| Resolution |
0.01A/V |
| Maximum output power |
4200W/90S |
| Maximum stable output power |
3600W |
| 5V regulated output |
maximum 5A, stable 4A |
| Communication protocol |
UAVCAN |
| CAN PMU Lite Options |
Choose an optionCAN PMU Lite * 2 PcsCAN PMU Lite & Pixhawk V6X V2 ControllerCAN PMU Lite & NEO 3 GPS / SetCAN PMU Lite & NEO 3 Pro GPS / SetCAN PMU Lite & NEO 3X GPS / SetClear |
| oltage accuracy |
±0.15V |
| letter of agreement |
UAVCAN |
| Operating temperature |
-20 ~ 100℃ |
| Firmware upgrade |
stand by |
| Interface Type |
IN / OUT: XT60-M / XT60-F |
| Product Size |
140mm (length) * 25mm (width) * 13mm (height) |
| APM firmware support |
1.Rover 3.5.1and above are available |
| PX4 firmware support |
PX4 Pro V1.10.1 or higher |
| Versiyon |
Can-Pmu-Lite-Options: CAN PMU Lite * 2 Pcs ,Can-Pmu-Lite-Options: CAN PMU Lite & Pixhawk V6X V2 Controller ,Can-Pmu-Lite-Options: CAN PMU Lite & NEO 3 GPS / Set ,Can-Pmu-Lite-Options: CAN PMU Lite & NEO 3 Pro GPS / Set ,Can-Pmu-Lite-Options: CAN PMU Lite & NEO 3X GPS / Set |