49 sonuçtan 1-12 arası gösteriliyor
CUAV 7 Nano V2 Upgrade Small Size Controller for FPV Drone
Yurtdışı Tedarik
| Weight |
33g |
|---|---|
| Dimensions |
10 × 10 × 5 cm |
| Processor |
STM32H753(Arm Cortex -M7,480MHz, 2MB FLASH) |
| Acce&Gyro |
IIM-42652/BMI088 |
| Compass |
IST8310 |
| UART |
5 |
| 12C |
3 |
| PWM Output |
14 |
| PWM Level |
3.3V/5V(8 CH) |
| RC IN |
1 |
| RSSI |
Support |
| Size |
30.5×25.5×31.8mm |
| Barometer |
ICP-20100/BMP581 |
| I2C |
3 |
| PWM OUT |
14 (Configurable for 3.3V / 5V) |
| CAN BUS |
2 |
| Power IN |
1 |
| Safety Switch |
1 |
| GPS 2 |
1 |
| ADC |
ADC3.3 & ADC6.6 |
| Debug |
FMU Debug |
| USB |
Type-C |
| Ethernet |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
| Detection Current(MAX) |
79.2 A |
| BEC OUT |
5.3V / 4A |
| Voltage and Current Accuracy |
±0.2V / 0.5A |
| Splitter |
Divided into six |
| Interfaces |
XT60 / GH1.25 6Pin |
| Main processor |
STM32H753 |
| Power |
1 |
| GPS&Safety |
1 |
| GPS2 |
1 |
| TELEM |
2 |
| TF card slot |
1 |
| Power Module |
7-Nano PDB |
CUAV 7-Nano V2 Open Source Controller Drone Accessories Kits
Yurtdışı Tedarik
| Weight |
33g |
|---|---|
| Dimensions |
10 × 10 × 5 cm |
| Processor |
STM32H753(Arm Cortex -M7,480MHz, 2MB FLASH) |
| Acce&Gyro |
IIM-42652/BMI088 |
| Compass |
IST8310 |
| UART |
5 |
| 12C |
3 |
| PWM Output |
14 |
| PWM Level |
3.3V/5V(8 CH) |
| RC IN |
1 |
| RSSI |
Support |
| Size |
30.5×25.5×31.8mm |
| Accessories Kit Options |
Choose an option7-Nano V2 Controller Standard7-Nano V2 Controller with PDB Power Module7-Nano V2 Controller with NEO 3X GNSS Module7-Nano V2 Controller with NEO 3 Pro GNSS Module7-Nano V2 Controller with NEO 4 SE GNSS Module7-Nano V2 Controller with NEO 4 Nano GNSS Module7-Nano V2 Controller with C-RTK 9 Ps(Rover Unit, Base Unit, Stand Combo)7-Nano V2 Controller with C-RTK 9 Ps(Base Unit) & C-RTK 2HP(Rover Unit)Clear |
| Barometer |
ICP-20100/BMP581 |
| I2C |
3 |
| PWM OUT |
14 (Configurable for 3.3V / 5V) |
| CAN BUS |
2 |
| Power IN |
1 |
| Safety Switch |
1 |
| GPS 2 |
1 |
| ADC |
ADC3.3 & ADC6.6 |
| Debug |
FMU Debug |
| USB |
Type-C |
| Ethernet |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
| Detection Current(MAX) |
79.2 A |
| BEC OUT |
5.3V / 4A |
| Voltage and Current Accuracy |
±0.2V / 0.5A |
| Splitter |
Divided into six |
| Interfaces |
XT60 / GH1.25 6Pin |
| Main processor |
STM32H753 |
| Power |
1 |
| GPS&Safety |
1 |
| GPS2 |
1 |
| TELEM |
2 |
| TF card slot |
1 |
| Power Module |
7-Nano PDB |
| Versiyon |
Accessories-Kit-Options: 7-Nano V2 Controller Standard ,Accessories-Kit-Options: 7-Nano V2 Controller with PDB Power Module ,Accessories-Kit-Options: 7-Nano V2 Controller with NEO 3X GNSS Module ,Accessories-Kit-Options: 7-Nano V2 Controller with NEO 3 Pro GNSS Module ,Accessories-Kit-Options: 7-Nano V2 Controller with NEO 4 SE GNSS Module ,Accessories-Kit-Options: 7-Nano V2 Controller with NEO 4 Nano GNSS Module ,Accessories-Kit-Options: 7-Nano V2 Controller with C-RTK 9 Ps(Rover Unit, Base Unit, Stand Combo) ,Accessories-Kit-Options: 7-Nano V2 Controller with C-RTK 9 Ps(Base Unit) & C-RTK 2HP(Rover Unit) |
CUAV Drone Pixhawk V5+ Drone Controller PX4 APM
Yurtdışı Tedarik
| Ağırlık | 1 lbs |
|---|---|
| Weight |
1 kg |
| Dimensions |
30 × 20 × 10 cm |
| V5+ Controller |
V5+ Controller/ please contact customer service for the stock availability, V5+ & NEO 3 GPS/please contact customer service for the stock availability, V5+ & NEO 3 pro GPS/ please contact customer service for the stock availability, V5+ & NEO 3X GPS/ please contact customer service for the stock availability |
| Tool Supplies |
Assembled class |
| Size |
85.5*42*33mm |
| Technical parameters |
KV1100 |
| For Vehicle Type |
Airplanes |
| Four-wheel Drive Attributes |
Assemblage |
| Power |
Battery |
| Scale |
1:5 |
| Main processor |
STM32F765 (32 Bit Arm Cortex-M7, 216MHz, 2MB flash, 512KB RAM) |
| Coprocessor |
STM32F100 (32 Bit Arm Cortex R-M3, 24MHZ, 8KB SRAM) |
| Accelerometer |
ICM-20602/ICM-20689/BMI055 |
| Gyro |
ICM-20602/ICM-20689/BMI055 |
| Compass |
IST8310 |
| Barometer |
MS5611*2 |
| UART |
5 |
| I2C |
4 |
| SPI |
1 |
| CAN |
2 |
| ADC |
2 |
| PWM out |
14 |
| PWM in |
6 |
| PPM in |
1 |
| DSM/SBUS/RSSI |
1 |
| Power 1 |
1 |
| Power 2 |
1 |
| Safety switch |
1 |
| Buzzer |
1 |
| USB-TYPE-C |
1 |
| TF slot |
1 |
| Firmware |
Px4/Ardupilot |
| Model |
Copter/Plane/Helicopter/NTOL/unmanned vehicle/Rover, etc. |
| Versiyon |
V5-Controller: V5+ Controller/ please contact customer service for the stock availability ,V5-Controller: V5+ & NEO 3 GPS/please contact customer service for the stock availability ,V5-Controller: V5+ & NEO 3 pro GPS/ please contact customer service for the stock availability ,V5-Controller: V5+ & NEO 3X GPS/ please contact customer service for the stock availability |
CUAV New FPV Drone Small Size Cube 7 Nano Controller
Yurtdışı Tedarik
| Ağırlık | 2085 lbs |
|---|---|
| Weight |
0.3 kg |
| Dimensions |
20 × 10 × 10 cm |
| 7 Nano |
7 Nano-VDM/ please contact customer service for the stock availability, 7 Nano-PDB/ please contact customer service for the stock availability |
| Material |
Metal |
| Tool Supplies |
Assembly Category |
| Upgrade Parts/Accessories |
Autopilot |
| RC Parts & Accs |
Speed Controller |
| Size |
77*45.5*39mm |
| Technical parameters |
KV1100 |
| Remote Control Peripherals/Devices |
Remote controller |
| For Vehicle Type |
Airplanes |
| Certification |
CE |
| Type |
Airplane |
| Processor |
STM32H753(Arm Cortex -M7,480MHz, 2MB FLASH) |
| Acce&Gyro |
IIM-42652/BMI088 |
| Compass |
IST8310 |
| Barometer |
ICP-20100/BMP581 |
| I2C |
3 |
| PWM OUT |
14 (Configurable for 3.3V / 5V) |
| RC IN |
1 (Support PPM SBUS DSM) |
| RSSI |
PWM or 3.3V analog voltage |
| CAN BUS |
2 |
| Power IN |
1 |
| Safety Switch |
1 |
| GPS 2 |
1 |
| ADC |
ADC3.3 & ADC6.6 |
| DEBUG |
1 |
| USB |
Type-C |
| Ethernet |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
| Detection Current(MAX) |
79.2 A |
| BEC OUT |
5.3V / 4A |
| Voltage and Current Accuracy |
±0.2V / 0.5A |
| Splitter |
Divided into six |
| Interfaces |
XT60 / GH1.25 6Pin |
| Versiyon |
7-Nano: 7 Nano-VDM/ please contact customer service for the stock availability ,7-Nano: 7 Nano-PDB/ please contact customer service for the stock availability |
CUAV New Pixhawk V6X controller
Yurtdışı Tedarik
| Ağırlık | 2085 lbs |
|---|---|
| Weight |
0.3 kg |
| Dimensions |
20 × 10 × 10 cm |
| V6X |
V6X/ please contact customer service for the stock availability, V6X & NEO 3 GPS/ please contact customer service for the stock availability, V6X & NEO 3 pro GPS/ please contact customer service for the stock availability, V6X & NEO 3X GPS/ please contact customer service for the stock availability |
| Hardware tandrard |
Pixhawk FMUV6X |
| Processor |
STM32H753IIK6 |
| Coprocessor |
STM32F10X |
| Compass |
RM3100 |
| Barometer |
2xICP-20100 |
| Size & Weight |
45 x 90 x 29.2mm 98g |
| Operating Voltage |
4.75~5.45V |
| TELEM |
3 |
| Operating temperature |
-20~85℃ |
| FMU Processor |
STM32H753(Arm® Cortex®-M7,480MHz,2MB FLASH, 1MB RAM) |
| IO Processor |
STM32F103(Arm® Cortex®-M3,72MHz) |
| Accelerometer |
ICM-42688-P/ICM-20649/BMI088 |
| Gyroscope |
ICM-42688-P/ICM-20649/BMI088 |
| PWM OUT |
16 |
| Power（CAN） |
2 |
| Power(SMBUS） |
2（5055680681-5055650601） |
| GPS |
2(one is equipped with I2C and a safety switch (GPS1), and the other is equipped with I2C (GPS2)) |
| CAN |
2 |
| PPM RC |
1 |
| SBUS/DSM/RSSI |
1 |
| SBUS OUT |
1 |
| FMU DEBUG |
1 |
| IO DEBUG |
1 |
| Ethernet |
1 |
| SPI |
1(SPI6 interface，for expanding external sensors) |
| ADIO |
1 (ADC3.3 / ADC6.6) |
| UART4 |
1 |
| USB |
2 (Type-C × 1 GH1.25 × 1) |
| TF Slot |
1 |
| Rated Voltage |
4.75 ~ 5.70 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 9.9 V |
| Working Temp |
-20 ~ 85 ℃ |
| Size |
45.0 × 90.0 × 29.2mm |
| Versiyon |
V6X: V6X/ please contact customer service for the stock availability ,V6X: V6X & NEO 3 GPS/ please contact customer service for the stock availability ,V6X: V6X & NEO 3 pro GPS/ please contact customer service for the stock availability ,V6X: V6X & NEO 3X GPS/ please contact customer service for the stock availability |
CUAV Nora+ Controller For PIX and APM Drone Hardware
Yurtdışı Tedarik
| Ağırlık | 2085 lbs |
|---|---|
| Weight |
1 kg |
| Dimensions |
30 × 20 × 10 cm |
| Nora FC options |
Nora+ FC * 1 piece, Nora+ & NEO 3X GPS / Set, Nora+ & NEO 3 GPS / Set, Nora+ & NEO 3 pro GPS / Set, Nora+ & NEO 4 SE GPS / Set |
| Material |
Metal |
| Tool Supplies |
Assembly class |
| Upgrade Parts/Accessories |
Flight controller |
| RC Parts & Accs |
Speed Controller |
| Size |
64*46*22mm |
| Use |
Vehicles & Remote Control Toys |
| Technical parameters |
KV1100 |
| Remote Control Peripherals/Devices |
Remote Controller |
| For Vehicle Type |
Helicopter |
| Four-wheel Drive Attributes |
Shell/Chassis/Wing/Head |
| Processor |
STM32H743/STM32H753(Arm Cortex-M7,480MHz, 2MB FLASH, 1MB RAM) |
| Accelerometer |
ICM-42688-P / ICM-20689 / BMI088 |
| Gyroscope |
ICM-42688-P / ICM-20689 / BMI088 |
| Compass |
RM3100 |
| Barometer |
MS5611 *2 |
| UART |
5 |
| I2C |
6 (2 interfaces are integrated in GPS&SAFETY&UART4) |
| PWM OUT |
14 ( M1~M12 Support DSHOT protocol) |
| RC IN |
1 (Support PPM SBUS DSM) |
| RSSI |
PWM or 3.3V analog voltage |
| CAN |
2 |
| Power IN |
2 (Power A for ADC protocol, Power C for CAN protocol) |
| Safety Switch |
1 |
| GPS Port |
2（UART4 can be used as GPS2 interface) |
| DEBUG |
1 |
| JATG |
1 |
| USB |
2 (Type-C × 1 GH1.25 × 1) |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
| Versiyon |
Nora-Fc-Options: Nora+ FC * 1 piece ,Nora-Fc-Options: Nora+ & NEO 3X GPS / Set ,Nora-Fc-Options: Nora+ & NEO 3 GPS / Set ,Nora-Fc-Options: Nora+ & NEO 3 pro GPS / Set ,Nora-Fc-Options: Nora+ & NEO 4 SE GPS / Set |
CUAV RTK One-to-Multiple Package A | Nora+ Controller C-RTK 9Ps P9 Telemetry
Yurtdışı Tedarik
| Ağırlık | 1260 lbs |
|---|---|
| Weight |
2 kg |
| Dimensions |
30 × 30 × 20 cm |
| Package Options |
RTK One-to-Multiple Package A, Contact customer service to freely match and combine |
| Processor |
STM32H743/STM32H753(Arm Cortex-M7,480MHz, 2MB FLASH, 1MB RAM) |
| Accelerometer |
ICM-42688-P / ICM-20689 / BMI088 |
| Gyroscope |
ICM-42688-P / ICM-20689 / BMI088 |
| Compass |
RM3100 |
| Barometer |
MS5611 *2 |
| UART |
5 |
| I2C |
6 (2 interfaces are integrated in GPS&SAFETY&UART4) |
| PWM OUT |
14 ( M1~M12 Support DSHOT protocol) |
| RC IN |
1 (Support PPM SBUS DSM) |
| RSSI |
PWM or 3.3V analog voltage |
| CAN |
2 |
| Power IN |
2 (Power A for ADC protocol, Power C for CAN protocol) |
| Safety Switch |
1 |
| GPS Port |
2（UART4 can be used as GPS2 interface) |
| DEBUG |
1 |
| JATG |
1 |
| USB |
2 (Type-C × 1 GH1.25 × 1) |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
| Size |
85.5 × 42.0 × 33.0mm |
| Receiver |
184 channelZED-F9P(ublox) |
| GNSS |
GPS、BDS、GALILEO、GLONASS |
| Concurrent GNSS |
4 |
| GNSS Bands |
GPS-L1C/A,GPS-L2C,GLONASS-L10F,GLONASS-L2OF,GALILEO-E1B/C,GALILEO-E5b,BDS-B11,BDS-B2I,QZSS-L1CIA,QZSS-L2C, |
| Nav.update rate |
RTK20Hz; RAW25Hz; PVT25Hz (The maximum limit is related to the concurrency setting) |
| Position Accuracy |
RTK:0.01m+1ppm CEPGPS:1.5m CEP;SBAS:1.0m CEP |
| Convergence Time |
RTK<60s |
| Acquisition |
Cold start<24sHot start<1s |
| Sensitivity |
Tracking and nav-167dBmCold start-148 dBmHot start-157 dBmReacquisition -160 dBm |
| Anti-jamming |
Active CW detection and removal, Onboard band pass filter |
| Anti-spoofing |
Advanced anti-spoofing algorithms |
| Antenna Gain |
Rover:2dBi Base:5dBi |
| PPK |
Not Support |
| GPS Heading |
Support(requirestwo C-RTK9Ps);heading accuracy:0.4edg(reference value) |
| Base/Rover Role Swap |
Support |
| Protocols |
NMEA、UBX binary、RTCM 3.x |
| Operating Voltage |
12 ~ 60V |
| Operating Temperature |
-40～85℃ |
| Working Frequency |
902 ~ 928 MHz |
| Transmission Technology |
Frequency Hopping |
| Transfer Protocol |
Transparent Transmission |
| Forwarding Error Detection |
Hamming /BCH/Golay/Reed-Solomon |
| Error Detecting |
Error Detection 32 bits of CRC, ARQ |
| Encrypt |
Optional (see AES option) |
| Range |
Reference distance: 40km(The transmission distance is different under different environments/ configurations, please refer to actual use) |
| Output Power |
100mW ~ 1W (20 ~ 30dBm)（Default：1W) |
| Serial Interface |
3.3V CMOS TTL |
| Baud Rate |
Up to 230.4kbps;57600（Default） |
| Link Rate |
115 ~ 276 kbps |
| Operating Modes |
Auto Routing, Store and Forward, Self Healing, Packet Routing Modes |
| Power Consumption |
Sleep < 1mAIdle < 3.5mARX：35mA ~ 80mATX：800mA ~ 1200mA |
| Interface |
Serial: GHR-06V-SAntenna: SMA inner needleUSB: Type-CPower: TX30PW-M |
CUAV V5+/X7+ Carrier Base Board Flight Controller Pixhawk For FPV RC Quadcopter Helicopter
Yurtdışı Tedarik
| Ağırlık | 91 lbs |
|---|---|
| Baseboard |
V5+ base board, X7+/ X7+ pro base board |
| Main FMU Processor |
STM32F765 (32 Bit Arm Cortex -M7, 216MHz, 2MB FLASH, 512KB RAM) |
| IO Processor |
STM32F100 (32 Bit Arm Cortex -M3,24MHz, 8KB SRAM) |
| Accelerometer |
ICM-20602 / ICM-20689 / BMI055 |
| Gyroscope |
ICM-20602 / ICM-20689 / BMI055 |
| Magnetometer |
IST8310 |
| Barometer |
MS5611 |
| UART |
5 |
| I2C |
4 |
| SPI |
1 |
| CAN |
2 |
| ADC |
2 |
| PWM |
8 ~ 14 PWM outputs (6 from IO, 8 from FMU) |
| DSM/SBUS/RSSI |
1 |
| PPM IN |
1 |
| Power Interface |
2 |
| Safety Switch |
1 |
| DEBUG / F7 SWD |
1 |
| USB |
1 (Type-C) |
| TF slot |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
5V ± 0.25 V |
| Servo Voltage |
0 ~ 36 V |
| Working Temp |
-20 ~ 85℃ |
| Size |
85.5 × 42.0 × 33.0mm |
| Weight |
91g |
| Versiyon |
Baseboard: V5+ base board ,Baseboard: X7+/ X7+ pro base board |
CUAV X25 EVO Controller Open Source Drone Unmanned Systems
Yurtdışı Tedarik
| Ağırlık | 285 lbs |
|---|---|
| Weight |
110g |
| Dimensions |
20 × 10 × 10 cm |
| Material |
Metal |
| Main Processor |
STM32H753 |
| Acc & Gyro |
IIM-42653; IIM42652; IIM42653 |
| Compass |
RM3100 |
| Barometer |
ICP-20100/ BMP581 |
| UART Serial Port |
7 |
| Servo OUT |
16 |
| 5V PWM |
Support |
| Size |
76.5*45.45*32.2mm |
| Processor |
STM32H7 Arm° Cortex°-M7 480 MHz |
| Version |
X25 EVO |
| Gyro&Acce |
IIM-42653×2Gyro Sensing Range:±4OOO°/sAccel Sensing Range: ±32gIIM-42652Gyro Sensing Range:±2000°/sAccel Sensing Range: ±16g |
| PWM OUT |
16 |
| Power IN (CAN) |
2(5055670871-5055650801) |
| GPS Ports |
2 |
| TELEM Ports |
2 |
| UART4 Ports |
1 |
| RC IN |
1(PPM/SBUS/DSM,etc.) |
| DEBUG Ports (DSU) |
1 |
| Ethernet (ETH) |
1 |
| CAN Bus |
CAN1x3CAN2x2 |
| SPl6 Expansion |
1 |
| ADC 3V3 |
1 |
| ADC 6V6 |
1 |
| USB Ports |
1(Type-C) |
| I2C Ports |
3 |
| RSSI Ports |
1 |
| Power Module |
PMU 2 Lite |
| Input Voltage |
USB:4.75v~5.25vPMU 2Lite: 20V～70VPower: 1OV~18V |
| Operating Temperature |
-2OC～+85C |
CUAV X7+ Controller For PX4 APM Drone Hardware
Yurtdışı Tedarik
| Ağırlık | 2085 lbs |
|---|---|
| Weight |
1 kg |
| Dimensions |
30 × 20 × 10 cm |
| X7 FC options |
X7+ FC * 1 piece, X7+ & NEO 3X GPS / Set, X7+ & NEO 3 GPS / Set, X7+ & NEO 3 pro GPS / Set, X7+ & NEO 4 SE GPS / Set |
| Processor |
STM32F765 |
| Frequency |
480MHZ |
| RAM |
1024K |
| Flash |
2048K |
| PWM OUT |
14 ( M1~M12 Support DSHOT protocol) |
| I2C |
4 |
| Size |
77*45.5*39 |
| Power interface |
2(one for I2C one for analog) |
| ADC_IN |
2 |
| Radio Control Style |
RC Model |
| Accelerometer |
ICM-42688-P / ICM-20689 / ICM-20689 |
| Gyroscope |
ICM-42688-P / ICM-20689 / ICM-20689 |
| Compass |
RM3100 |
| Barometer |
MS5611 *2 |
| UART |
5 |
| RC IN |
1 (Support PPM SBUS DSM) |
| RSSI |
PWM or 3.3V analog voltage |
| CAN |
2 |
| Power IN |
2 (Power A for ADC protocol, Power C for CAN protocol) |
| Safety Switch |
1 |
| GPS |
2 |
| ADC |
1 |
| DEBUG |
1 |
| JATG |
1 |
| USB |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
| Versiyon |
X7-Fc-Options: X7+ FC * 1 piece ,X7-Fc-Options: X7+ & NEO 3X GPS / Set ,X7-Fc-Options: X7+ & NEO 3 GPS / Set ,X7-Fc-Options: X7+ & NEO 3 pro GPS / Set ,X7-Fc-Options: X7+ & NEO 4 SE GPS / Set |
CUAV X7+ Core Controller Open Source For PX4 Pixhawk
Yurtdışı Tedarik
| Ağırlık | 2085 lbs |
|---|---|
| Weight |
0.5 kg |
| Dimensions |
20 × 10 × 10 cm |
| Processor |
STM32F765 |
| Frequency |
480MHZ |
| RAM |
1024K |
| Flash |
2048K |
| PWM OUT |
14 ( M1~M12 Support DSHOT protocol) |
| I2C |
4 |
| Size |
77*45.5*39 |
| Power interface |
2(one for I2C one for analog) |
| ADC_IN |
2 |
| Radio Control Style |
RC Model |
| Accelerometer |
ICM-42688-P / ICM-20689 / ICM-20689 |
| Gyroscope |
ICM-42688-P / ICM-20689 / ICM-20689 |
| Compass |
RM3100 |
| Barometer |
MS5611 *2 |
| UART |
5 |
| RC IN |
1 (Support PPM SBUS DSM) |
| RSSI |
PWM or 3.3V analog voltage |
| CAN |
2 |
| Power IN |
2 (Power A for ADC protocol, Power C for CAN protocol) |
| Safety Switch |
1 |
| GPS |
2 |
| ADC |
1 |
| DEBUG |
1 |
| JATG |
1 |
| USB |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
CUAV X7+ Pro Core Controller Core Module For Customize Baseboard
Yurtdışı Tedarik
| Ağırlık | 2085 lbs |
|---|---|
| Weight |
1 kg |
| Dimensions |
30 × 20 × 10 cm |
| Material |
Metal |
| Tool Supplies |
Assembly Category |
| Upgrade Parts/Accessories |
Ardupilot |
| RC Parts & Accs |
Speed Controller |
| Size |
77*45.5*39mm |
| Technical parameters |
KV1100 |
| Remote Control Peripherals/Devices |
Remote controller |
| For Vehicle Type |
Airplanes |
| Four-wheel Drive Attributes |
Shell/Chassis/Wing/Head |
| Processor |
STM32H743(Arm Cortex -M7,480MHz,2MB FLASH, 1MB RAM) |
| Accelerometer |
ADIS16470 / ICM-42688-P / ICM-20689 |
| Gyroscope |
ADIS16470 / ICM-42688-P / ICM-20689 |
| Compass |
RM3100 |
| Barometer |
MS5611 *2 |
| UART |
5 |
| I2C |
6 (2 interfaces are integrated in GPS&SAFETY&UART4) |
| PWM OUT |
14 ( M1~M12 Support DSHOT protocol) |
| RC IN |
1 (Support PPM SBUS DSM) |
| RSSI |
PWM or 3.3V analog voltage |
| CAN |
2 |
| Power IN |
2 (Power A for ADC protocol, Power C for CAN protocol) |
| Safety Switch |
Integrated into the GPS & SAFETY port |
| GPS Port |
2 |
| ADC |
1 |
| DEBUG |
1 |
| JATG |
1 |
| USB |
1 |
| Rated Voltage |
14.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |