44 sonuçtan 1-12 arası gösteriliyor
Drone GPS Modülü ve RTK / GNSS Sistemleri
Otonom uçuş, hassas konumlandırma ve güvenli dönüş (RTL) için drone GPS modülü sistemin temelini oluşturur. GNSS destekli modüller GPS, GLONASS, Galileo ve BeiDou uydularını birlikte kullanarak konum doğruluğunu artırır.
Flyonic; CUAV ve Holybro başta olmak üzere santimetre seviyesinde hassasiyet sunan RTK GNSS modüllerini, harici pusulaları ve anten çözümlerini sunar. Haritalama, tarımsal ilaçlama ve ölçüm projelerinde RTK teknolojisi, standart GPS’e göre çok daha yüksek konum doğruluğu sağlar.
RTK Hassasiyetiyle Profesyonel Konumlandırma
Anti-jamming ve anti-spoofing özellikli GNSS modülleri, elektronik karışma ortamlarında bile güvenilir konum verisi üretir. Pixhawk ve PX4 uyumlu drone GPS modülü seçenekleri için kategorimizi inceleyebilirsiniz.
CUAV C-RTK 3 G5 Anti-Jamming Spoofing GNSS Module for Drone
Yurtdışı Tedarik
| Ağırlık | 36 lbs |
|---|---|
| Weight |
0.5 kg |
| Dimensions |
10 × 10 × 5 cm |
| Processor |
STM32H5 Arm°Cortex-M33 250 MHz |
| Hardware Channel |
789 pcs |
| Support Constellation and Band |
GPS: L1C/A 、L2C 、L2PY 、L5 、L1CGLONASS: L1CA 、L2CA 、L2P 、L3 CDMABeiDou: B11 、B1C 、B2a 、B2I 、B31 、B2bGalileo: E1 、E5a 、E5b 、E6QZSS: L1C/A 、L1 C/B 、L2C 、L5 、L6 |
| Antenna Support |
Dual Antenna (configurable single/dual antenna working mode) |
| GNSS+ Technical Kit |
AIM+(anti-jamming/ anti-spoofing),LOCK+(vibration& shock resistance),APME+(multipath mitigation),IONO+(ionospheric protection),RAIM+(integrity monitoring) |
| Support Service |
Galileo HAS High-Precision Service (look-ahead function, enabled upon software update), Galileo OSNMA Service |
| Raw Data Output |
Support/ TF Card Recoding |
| Positioning Accuracy |
Standalone Accuracy: Horizontal 1.2 m, Vertical 1.9mDGNSS Accuracy: Horizontal 0.4m, Vertical 0.7 mRTK Accuracy: Horizontal 0.6 cm+0.5 ppmVertical 1 cm+1 ppm |
| Velocity Accuracy |
3 cm/s |
| Heading Accuracy |
At 1 m antenna separation, heading accuracy: 0.15°At 5m antenna separation, heading accuracy: 0.03° |
| Max Update Rate |
20 Hz |
| RTK Initialization Time |
7s (baseline<40 km) |
| Time Accuracy Related |
PPS Resolution: 1.4 nsEvent Accuracy: <3nsCold Start Time: <35s(no Ephemeris, no Coarse Position)Hot Start Time: <10s(with Ephemeris, with Coarse Position)Re-Acquisition Time: 1s |
| Tracking and Acquisition Threshold |
Tracking Threshold: 20 dB/HzAcquisition Threshold: 30 dB/Hz |
| Built-in Magnetometer |
RM3100 |
| Measurement Range |
±1100μT(wide dynamic magnetic field adaptation) |
| Resolution |
13 nT@200 Cycle Count; Detection Sensitivity 2.7 nT at 1Hz |
| Noise Level |
15nT@200 Cycle Count; Noise Floor 4pT/√ Hz(1Hz) |
| Linearity |
0.50% within ±200μT |
| Protocol |
DroneCAN |
| Communication Rate |
1 Mbit/s(CAN)8 Mbit/s(CAN FD) |
| Upgrade Support |
Support |
| Firmware |
C-RTK3 M4C |
| Data Interface |
JST GH 1.254P/TYPE-C USB |
| Size |
55.5×50×16.5 mm [Includes screw holes] |
| Operating Temperature |
-10℃~+80℃ |
| Horizontal coverage angle |
360° |
| Polarization |
Right-hand circular polarization |
| Gain(dB) |
38±2 |
| Connector type |
SMA-J |
| Antenna size |
Φ40*84.5 mm |
| Antenna weight |
36 g |
CUAV C-RTK 9Ps Positioning Module | High Precision GPS RTK GNSS Pixhawk
Yurtdışı Tedarik
| Ağırlık | 30 lbs |
|---|---|
| Tool Supplies |
Assembly Category |
| Upgrade Parts/Accessories |
GPS |
| RC Parts & Accs |
Servo Accessories |
| Size |
32*48*12mm |
| Compass |
IST8310 |
| Remote Control Peripherals/Devices |
GPS |
| Position Accuracy |
RTK:0.01m+1ppm CEPGPS:1.5m CEP;SBAS:1.0m CEP |
| RTK Surveyin-time |
RTK<60s |
| Radio Control Style |
RC Hobby |
| C-RTK 9Ps options |
Choose an optionRover unit stand comboBase unit comboRover unit stand unit and base unitcomboC-RTK 9Ps & Pixhawk V6X V2 ControllerC-RTK 9Ps & 7-Nano V2 ControllerClear |
| Receiver |
184 channelZED-F9P(ublox) |
| GNSS |
GPS、BDS、GALILEO、GLONASS |
| Concurrent GNSS |
4 |
| GNSS Bands |
GPS-L1C/A,GPS-L2C,GLONASS-L10F,GLONASS-L2OF,GALILEO-E1B/C,GALILEO-E5b,BDS-B11,BDS-B2I,QZSS-L1CIA,QZSS-L2C, |
| Nav.update rate |
RTK20Hz; RAW25Hz; PVT25Hz (The maximum limit is related to the concurrency setting) |
| Convergence Time |
RTK<60s |
| Acquisition |
Cold start<24sHot start<1s |
| Sensitivity |
Tracking and nav-167dBmCold start-148 dBmHot start-157 dBmReacquisition -160 dBm |
| Anti-jamming |
Active CW detection and removal, Onboard band pass filter |
| Anti-spoofing |
Advanced anti-spoofing algorithms |
| Antenna Gain |
Rover:2dBi Base:5dBi |
| PPK |
Not Support |
| GPS Heading |
Support(requirestwo C-RTK9Ps);heading accuracy:0.4edg(reference value) |
| Base/Rover Role Swap |
Support |
| UART |
2 UART |
| USB |
1 |
| Protocols |
NMEA、UBX binary、RTCM 3.x |
| Operating voltage |
4.5~6V |
| Operating Temperature |
-40～85℃ |
| Weight |
30g(Module Only) |
| Versiyon |
C-Rtk-9Ps-Options: Rover unit stand combo ,C-Rtk-9Ps-Options: Base unit combo ,C-Rtk-9Ps-Options: Rover unit stand unit and base unitcombo ,C-Rtk-9Ps-Options: C-RTK 9Ps & Pixhawk V6X V2 Controller ,C-Rtk-9Ps-Options: C-RTK 9Ps & 7-Nano V2 Controller |
CUAV High Precision RM3100 Magnetic C-Compass External Compass For Pixhawk And PX4
Yurtdışı Tedarik
| Weight |
13g |
|---|---|
| Dimensions |
20 × 10 × 10 cm |
| C-Compass Options |
C-Compass * 3 Pcs, C-Compass & NEO 3 GPS / Set, C-Compass & NEO 3 Pro GPS / Set, C-Compass & NEO 3X GPS / Set |
| Sensor |
RM3100 |
| MCU |
STM32F412 |
| Software Architecture |
CUAV M4C |
| Protocol |
DroneCan/UAVCAN |
| Accuracy |
0.25° (effective value) |
| Repetition Accuracy |
0.05° |
| Controller Type |
PX4/ArduPilot (CUAV/Pixhawk etc.) |
| Operating Voltage |
4.75-5.3V |
| Operating Temperature |
-20～80℃ |
| Communication Rate |
2Mb |
| Refresh Rate |
80Hz |
| Noise |
15nT |
| Resolution |
0.01° |
| Sensitivity |
13nT |
| Range |
-800 μTto+800 μT |
| Interface |
GHR-04V-S |
| Operating Humidity |
5%～95%(non-condensing) |
| Casing Material |
Aluminum alloy |
| Size |
31.5×31.0×14.0mm |
| Versiyon |
C-Compass-Options: C-Compass * 3 Pcs ,C-Compass-Options: C-Compass & NEO 3 GPS / Set ,C-Compass-Options: C-Compass & NEO 3 Pro GPS / Set ,C-Compass-Options: C-Compass & NEO 3X GPS / Set |
CUAV IST8 External Compass of GPS Module | PX4 Geomagnetic Sensor IST8310
Yurtdışı Tedarik
| Ağırlık | 0.5 lbs |
|---|---|
| Weight |
0.5 kg |
| Dimensions |
20 × 10 × 10 cm |
| IST8 Compass Options |
IST8 Compass V5+ version * 3 Pcs, IST8 & NEO 3 GPS / Set, IST8 & NEO 3 Pro GPS / Set, IST8 & NEO 3X GPS / Set |
| Rated voltage |
10 ~ 60V（3 ~ 14S Lipo) |
| Current(MAX) |
60A |
| Current Accuracy |
±0.2A |
| Voltage Accuracy |
±0.1V |
| 12V OUT |
4A |
| 5V OUT |
2A |
| FC power |
5A |
| Battery |
XT60 |
| 12V OUT5V OUTFC Power |
GH1.25 |
| Versiyon |
Ist8-Compass-Options: IST8 Compass V5+ version * 3 Pcs ,Ist8-Compass-Options: IST8 & NEO 3 GPS / Set ,Ist8-Compass-Options: IST8 & NEO 3 Pro GPS / Set ,Ist8-Compass-Options: IST8 & NEO 3X GPS / Set |
CUAV NEO 3 GPS Modülü
Yurtdışı Tedarik
| Ağırlık | 1070 lbs |
|---|---|
| Weight |
0.5 kg |
| Dimensions |
10 × 10 × 5 cm |
| NEO 3 GPS MOQ Options |
NEO 3 * 2pcs, NEO 3 * 5pcs, NEO 3 * 10pcs |
| Protocol |
UART/IO/I2C |
| GNSS Receiver |
UBLOX NEO M9N |
| GNSS concurrently |
beidou,galileo,glonass,gps |
| positioning accuracy |
0.7M |
| Compass |
IST8310 |
| Nav.update rate |
25MHZ |
| Remote Control Peripherals/Devices |
GPS |
| For Vehicle Type |
Airplanes |
| Plastic Type |
ABS |
| RGB Drive |
NCP5623 |
| Buzzer |
Passive buzzer |
| Safety Switch |
Physical button |
| Number of Concurrent GNSS |
4(BDS、GALILEO、GLONASS、GPS) |
| Frequency Band |
GPS: L1C/AGLONASS: L10FBDS: B11GALILEO: E1B/C |
| GNSS Augmentation System |
SBAS: WAAS, EGNOS, MSASQZSS:L1s(SAIF)other: RTCM3.3 |
| Horizontal Accuracy |
2.0m |
| Speed Accuracy |
0.05m/s |
| Acquisition |
Cold start:24sHot start:2sAided start:2s |
| Number of Saellites(MAX) |
32+ |
| Sensitivity |
Tracking and nav-167dBmCold start Hot start-148dBmReacquisition-160dBm |
| Port Type |
GHR-10V-S |
| Supported Controller |
CUAV series, Pixhawk series |
| Wave Filtering |
SAW+LNA+SAW |
| Anti-Lectromagnetic/Radio FrequencyInterference |
EMI+RFI |
| Upgrade Firmware |
Support |
| Support Control Type |
ArduPilot/PX4*(PX4 is stillworking hard to adapt to the clock) |
| Input Voltage |
4.7-5.2V |
| Operating Temperature |
-10～70℃ |
| Size |
60×60×16mm |
| Versiyon |
Neo-3-Gps-Moq-Options: NEO 3 * 2pcs ,Neo-3-Gps-Moq-Options: NEO 3 * 5pcs ,Neo-3-Gps-Moq-Options: NEO 3 * 10pcs |
CUAV NEO 3 Pro GPS Module | GNSS U-BLOX M9N CAN BUS
Yurtdışı Tedarik
| Ağırlık | 33 lbs |
|---|---|
| Weight |
33g |
| Dimensions |
10 × 10 × 5 cm |
| Processor |
STM32F412 |
| Sensor |
Compass: IST8310 ; Barometer: MS5611 |
| RGB Driver |
NCP5623C |
| Buzzer |
Passive Buzzer |
| Safety Switch |
Physical Button |
| GNSS Receiver |
UBLOX M9N |
| Number of Concurrent GNSS |
4(BDS、GALILEO、GLONASS、GPS) |
| Frequency Band |
GPS:L1C/AGLONASS:L10FBDS:B11GALILEO:E1B/C |
| GNSS Augmentation System |
SBAS:WAAS,EGNOS,MSASQZSS:L1s(SAIF)25Hz(Max) |
| Horizontal Accuracy |
2.0m (Highest measured value is 0.7m) |
| Speed Accuracy |
0.05m/s |
| Acquisition |
Cold Start:24sHotStart:2sAided Start:2s |
| Number of Satellites (MAX) |
32+ |
| Sensitivity |
Tracking&Nav:-167dBmColdstart&Hotstart:-148dBmReacquisition:-160dBm |
| Protocol |
UAVCAN |
| Wave Filtering |
SAW+LNA+SAW |
| Supported Controller |
CUAV series; Pixhawk series |
| Port Type |
GHR-04V-S |
| InputVoltage |
4.7~5.2V |
| Operating Temperature |
-10~70°℃ |
| Size |
60*60*16MM |
| NEO 3 Pro GPS MOQ Options |
Choose an optionNEO 3 Pro * 1 PieceNEO 3 Pro * 5pcsNEO 3 Pro * 10pcsNEO 3 Pro & Pixhawk V6X V2 ControllerNEO 3 Pro & 7-Nano V2 ControllerClear |
| Compass |
RM3100 |
| Barometer |
MS5611 |
| Nav. update rate |
25Hz(Max) |
| Number of Satellites(MAX) |
32+ |
| Anti-Electromagnetic/ Radio Frequency Interference |
EMI+RFI |
| Upgrade firmware |
Support |
| Support Control Type |
ArduPilot/PX4 |
| Input Voltage |
4.7-5.2V |
| Versiyon |
Neo-3-Pro-Gps-Moq-Options: NEO 3 Pro * 1 Piece ,Neo-3-Pro-Gps-Moq-Options: NEO 3 Pro * 5pcs ,Neo-3-Pro-Gps-Moq-Options: NEO 3 Pro * 10pcs ,Neo-3-Pro-Gps-Moq-Options: NEO 3 Pro & Pixhawk V6X V2 Controller ,Neo-3-Pro-Gps-Moq-Options: NEO 3 Pro & 7-Nano V2 Controller |
CUAV NEO 4 NANO MINI GNSS MODULE U-BLOX M10 GPS for Drone
Yurtdışı Tedarik
| Ağırlık | 1080 lbs |
|---|---|
| Weight |
0.5 kg |
| Dimensions |
10 × 10 × 5 cm |
| Receiver Type |
u-blOx MIA-M10Q |
| Processor |
STM32H5 Arm Cortex-M33 250 MHz |
| Compass |
IIS2MDC |
| Frequency Band |
GPS: L1 C/AGLONASS: L1OFBDS: B11/B1CGalileo: E1B/C |
| Augmentation Systems |
SBAS: EGNOS, GAGAN, MSAS, WAAS, BDSBAS, KASS and SouthPANQZSS: L1S (SLAS) |
| Number of Concurrent GNSS |
4(BDS, Galileo, GLONASS, GPS) |
| Oscillators |
TCXO |
| Acquisition |
Cold Start: 27 s I Hot Start: 1 s I Aided Start: 1 s |
| Nav. Update Rate |
Up to 10 Hz(4 concurrent GNSS)Up to 25 Hz (single GNSS) |
| Horizontal Position Accuracy |
1.5 m CEP |
| Signal Integrity |
RF interference and jamming detection and reportingdetection and reporting |
| Wave Filtering |
SAW+LNA+SAW+LNA |
| Anti Electromagnetic/ Radio Frequency Interference |
EMI+RFI |
| Protocol |
DroneCAN |
| Upgrade Firmware |
Support |
| Firmware |
CUAV M4C GNSS |
| Data Interface |
GHR-04V-S |
| Product Options |
Choose an optionNEO 4 Nano GNSS Module * 2PcsNEO 4 Nano & Pixhawk V6X V2 ControllerNEO 4 Nano & 7-Nano V2 ControllerClear |
| Size |
34 * 20 * 14.5 mm |
| Input Voltage |
4.7～5.2V |
| Operating Temperature |
-10 ℃ ~ +80 ℃ |
| CUAV Products |
NEO 3 |
| Sensor |
Compass:IST8310 |
| RGB Driver |
NCP5623C |
| Buzzer |
Passive Buzzer |
| Safety Switch |
Physical Button |
| GNSS Receiver |
u-blox M9N |
| Number ofConcurrent GNSS |
4(BDS、Galileo、GLONASS、GPS) |
| GNSSAugmentationSystem |
SBAS:WAAS,EGNOS,MSASQZSS:L1s(SAIF)Other: RTCM3.3 |
| HorizontalAccuracy |
2.0m(Highest measured value is 0.7m) |
| Speed Accuracy |
0.05m/s |
| Number ofSatellites(MAX) |
32+ |
| Sensitivity |
Tracking &Nav:-167dBmCold start &Hot start:-148dBmReacquisition:-160dBm |
| Anti Electromagnetie/Radio FrequencyInterference |
EMI+RFI |
| SupportedController |
CUAV seriesPixhawk series |
| Port Type |
GHR-10V-S |
| OperatingTemperature |
-10～+70℃ |
| Protection Level |
一 |
| Versiyon |
Product-Options: NEO 4 Nano GNSS Module * 2Pcs ,Product-Options: NEO 4 Nano & Pixhawk V6X V2 Controller ,Product-Options: NEO 4 Nano & 7-Nano V2 Controller |
CUAV NEO 4 SE GPS Module U-BLOX M10 GNSS
Yurtdışı Tedarik
| Ağırlık | 1080 lbs |
|---|---|
| Weight |
0.5 kg |
| Dimensions |
10 × 10 × 5 cm |
| Product variants |
MIA-M10Q |
| Built-in processor |
STM32H5 Arm Cortex-M33 250 MHz |
| GNSS |
BeiDou, Galileo, GLONASS, GPS / QZSS |
| Oscillators |
TCXO |
| Acquisition 1 |
Cold start: 27 sAided start: 1 sHot start: 1 s |
| Nav.Update Rate |
25Hz(Max) |
| Horizontal Position Accuracy |
1.5 mCEP |
| Communication protocol |
DroneCAN |
| Run firmware |
CUAV M4C PMU2 |
| Data Interface |
GHR-04V-S |
| Operating Temperature |
-10 ℃ ~ +80 ℃ |
| Product Options |
Choose an optionNEO 4 SE GPS * 2PcsNEO 4 SE & Pixhawk V6X V2 ControllerNEO 4 SE & 7-Nano V2 ControllerClear |
| Receiver Type |
u-blox MIA-M10Q |
| Processor |
STM32H5ArmCortex-M33250 MHz |
| Compass |
IIS2MDC |
| Frequency Band |
GPS: L1 C/AGLONASS: L1OFBeiDou: B11/B1CGalileo: E1B/C |
| AugmentationSystems |
SBAS: EGNOS, GAGAN, MSAS, WAAS, BDSBAS, KASS, and SouthPANQZSS: L1S (SLAS) |
| Number of Concurrent GNSS |
4(BeiDou, Galileo, GLONASS, GPS) |
| Acquisition |
Cold Start: 27 s I Hot Start: 1 s I Aided Start: 1 s |
| Sensitivity |
Tracking and Nav: -167 dBmReacquisition: -160 dBmCold Start: -148 dBmHot Star: -159 dBm |
| Signal Integrity |
RF interference and jamming detection and reporting, spoofing detection and reporting |
| Wave Filtering |
SAW+LNA+SAW+LNA |
| Anti Electromagnetic/Radio FrequencyInterference |
EMI+RFI |
| Protocol |
DroneCAN |
| Upgrade Firmware |
Support |
| Firmware |
CUAV M4C GNSS |
| Size |
60 × 60 x 16.1 mm |
| Input Voltage |
4.7～5.2V |
| CUAV Products |
NEO 3 |
| Sensor |
Compass:IST8310 |
| RGB Driver |
NCP5623C |
| Buzzer |
Passive Buzzer |
| Safety Switch |
Physical Button |
| GNSS Receiver |
u-blox M9N |
| Number ofConcurrent GNSS |
4(BDS、Galileo、GLONASS、GPS) |
| GNSSAugmentationSystem |
SBAS:WAAS,EGNOS,MSASQZSS:L1s(SAIF)Other:RTCM3.3 |
| HorizontalAccuracy |
2.0m(Highest measured value is 0.7m) |
| Speed Accuracy |
0.05m/s |
| Number ofSatellites(MAX) |
32+ |
| Anti Electromagnetie/Radio FrequencyInterference |
EMI+RFI |
| SupportedController |
CUAV seriesPixhawk series |
| Port Type |
GHR-10V-S |
| OperatingTemperature |
-10～+70℃ |
| Protection Level |
一 |
| Versiyon |
Product-Options: NEO 4 SE GPS * 2Pcs ,Product-Options: NEO 4 SE & Pixhawk V6X V2 Controller ,Product-Options: NEO 4 SE & 7-Nano V2 Controller |
CUAV New C-RTK 2HP Dual Antenna Centimeter Position GNSS Heading Module
Yurtdışı Tedarik
| Ağırlık | 2085 lbs |
|---|---|
| Weight |
40g |
| Dimensions |
20 × 10 × 10 cm |
| Processor |
STM32F4 |
| Sensor |
Compass – RM3100 Grro/ACC – ICM42688 |
| Channels |
1408 channels |
| GNSS |
BDS/GPS/GLONASS/Galileo/QZSS |
| Estimate yaw accuracy |
0.2 degrees/1m (distance between antenna 1 and antenna 2) |
| Max star |
Single : 28 + RTK:50 + |
| Positioning speed |
Cold start <30s/auxiliary start <5s |
| Data refresh rate |
5Hz (default); Max 20Hz |
| Data format |
RTCM3.X |
| C-RTK 2HP Options |
Choose an optionRTK 2HP setRTK 2HP with RTK 9Ps BasePixhawk V6X V2 Controller & C-RTK 9Ps Base Unit & C-RTK 2HP Rover Unit7-Nano V2 Controller & C-RTK 9Ps Base Unit & C-RTK 2HP Rover UnitClear |
| MCU |
STM32F412(32Bit ArmCortex⁶-M4, 100MHz,512KBFLASH,256KB RAM) |
| Compass |
RM3100 |
| Receiver |
High precision GNSSSoC |
| Antenna 1(Master) |
BDS:B11、B2I、B3IGPS:L1C/A、L2P/L2C、L5GLONASS:L1、L2GALILEO:E1、E5a、E5bQzSS:L1、L2、L5 |
| Antenna 2 |
BDS:B11、B2I、B3IGPS:L1C/A、L2CGLONASS:L1、L2Geo:E1、E5bQzSS:L1、L2GPS:L1C/A、L2CGLONASS:L1、L2GALILEO:E1、E5bQzSS:L1、L2 |
| Position Accuracy(RMS) |
Single Point 1.5m(Horizontal)/ 2.5m(Vertical)DGPS: 0.4m+1PPM(Horizontal/ 0.8m+1PPM(Vertical)RTK: 0.8cm+1PPM(Horizontal)/ 1.5cm+1PPM(Vertical) |
| Acquisition |
Cold start<30sInitialization time<5s |
| Data Update Rate |
UP to 20Hz (default:5Hz) |
| Differential Data |
RTCM3.X |
| Data Protocol |
DroneCAN/ NMEA |
| Sport |
Antenna*2、CAN*1、UART*1、DSU*1、USB*1 |
| Operating Voltage |
4.7～5.2V |
| Operating Temperature |
-20～85℃ |
| Size |
50×37×17mm |
| Versiyon |
C-Rtk-2Hp-Options: RTK 2HP set ,C-Rtk-2Hp-Options: RTK 2HP with RTK 9Ps Base ,C-Rtk-2Hp-Options: Pixhawk V6X V2 Controller & C-RTK 9Ps Base Unit & C-RTK 2HP Rover Unit ,C-Rtk-2Hp-Options: 7-Nano V2 Controller & C-RTK 9Ps Base Unit & C-RTK 2HP Rover Unit |
CUAV New LBA 3 Industrial Micro Private Network 4G 5G Large Bandwidth Hybird One To Multiple Communication Base Station
Yurtdışı Tedarik
| Ağırlık | 3.206 lbs |
|---|---|
| Weight |
Base Unit 1500g Air Unit 150 to 200g |
| Dimensions |
20 × 10 × 10 cm |
| LBA 3 |
Base station, Sky unit LW-1.4Ghz, Sky unit LW-800Mhz, Base+sky LW-800Mhz, Base+sky LW-1.4Ghz |
| Material |
Metal |
| Transmit Range 1 |
1.4 GHz 5W 45KM |
| Transmit Range 2 |
800MHz 5W 45KM |
| Frequency band 1 |
1420 to 1448MHz |
| Frequency band 2 |
806 to 826MHz |
| RF power |
5W max |
| Communication bandwidth |
30Mbps to 100Mbps |
| Encryption |
Support AES265 |
| Size |
Base Unit 220 mm*120 mm *50mm Air Unit 88 mm*50mm*20mm |
| Technical Standard |
Based on the LTE wireless communication standard |
| Anti-Jamming |
Dynamic frequency hopping, intelligent frequency hopping within the frequency band |
| Frequency Band |
1.4G version：1420-1448MHz800M version：806-826MHz |
| Transmit Power |
33dBm(Typical value） |
| Bandwidth |
default：20Mbps(10MHz)；30Mbps(MAX, 20MHz) |
| Operating Modes |
Star network, point-to-point |
| Modulation |
QPSK、16QAM、64QAM |
| Transmission Delay |
≤ 150ms |
| Management Interface |
LBA3 BASE is managed by WEB LW140/800, which is managed by AG (WEB) gateway |
| LTE Network Type |
LBA3 BASE built-in full Netcom 4G moduleSupport TD-LTE/FDD LTE/TD-SCDMA/WCDMA |
| Operating Temperature |
-15 ~ +65° |
| Operating Voltage |
LBA3 BASE：20~60V (Standard power consumption:24V 1.5A)POE module supports 100~240V Utility PowerLW140/800：20~60V (Standard power consumption:24V 1A) |
| Interface |
LW140/800：Antenna(MCX-KE) × 2POWER(5023520200 to XT30) × 1RJ45 × 1(5025850470)UART × 1USB × 1LBA3 BASE：N-type antenna × 2、Power(SF12 to XT60) × 1POE lan(SF12 to RJ45 Plug) × 1LAN(SF12 to RJ45 Plug) × 1AAT(SF12) × 1 |
| Degree of Protection |
LBA3 BASE: IP67LW140/800: IP20 |
| Versiyon |
Lba-3: Base station ,Lba-3: Sky unit LW-1.4Ghz ,Lba-3: Sky unit LW-800Mhz ,Lba-3: Base+sky LW-800Mhz ,Lba-3: Base+sky LW-1.4Ghz |
CUAV NEW NEO 3X GPS Module Ublox M9N GNSS for Drone
Yurtdışı Tedarik
| Ağırlık | 1070 lbs |
|---|---|
| Weight |
46g |
| Dimensions |
10 × 10 × 5 cm |
| MUC |
STM32F412 |
| Protocol |
DroneCAN |
| Compass |
RM3100 |
| Barometer |
ICP-20100 |
| GNSS receiver |
Ublox M9N |
| Number of Concurrent GNSS |
4 |
| Horizontal accuracy |
1.5m |
| Number of Satellites(MAX) |
32+ |
| Size |
67x67x21.2mm |
| NEO 3X GPS Options |
Choose an optionNEO 3X * 2pcsNEO 3X * 5pcsNEO 3X * 10pcsNEO 3X & Pixhawk V6X V2 ControllerNEO 3X & 7-Nano V2 ControllerClear |
| MCU |
STM32F412(32 Bit Arm® Cortex®-M4,100MHz, 512KB FLASH, 256KB RAM) |
| Satellite Receiver |
ublox M9N |
| Frequency Band |
GPS：L1C/A GLONASS：L10FBDS：B1I GALILEO：E1B/C |
| Horizontal |
1.5m |
| Accuracy |
(Highest measured value is 0.7m) |
| Acquisition |
Cold start：24sHot start：2sAided start：2s |
| Nav. update rate |
5Hz(default)，25Hz(MAX) |
| Sensitivity |
Tracking & Nav： -167dBmReacquisition：-160dBmCold start：-148dBmHot start：-159dBm |
| Protection Level |
IP66 |
| Operating Voltage |
4.7 ~ 5.2V |
| Operating Temperature |
-10 ~ 70℃ |
| Versiyon |
Neo-3X-Gps-Options: NEO 3X * 2pcs ,Neo-3X-Gps-Options: NEO 3X * 5pcs ,Neo-3X-Gps-Options: NEO 3X * 10pcs ,Neo-3X-Gps-Options: NEO 3X & Pixhawk V6X V2 Controller ,Neo-3X-Gps-Options: NEO 3X & 7-Nano V2 Controller |
CUAV P8 Radio Drone Telemetry | Long Distance Transmission
Yurtdışı Tedarik
| Ağırlık | 840845 lbs |
|---|---|
| P8 radio telemetry |
P8 radio one set, P8 sky unit, P8 ground unit |
| Material |
Aviation Aluminum |
| Working frequency |
840-845MHz |
| Transit Power |
1000mv |
| AirSpeed |
345kbps |
| Network Topology |
Point-to-Multipoint,relay Mode |
| Input Voltage |
12 ~ 60V |
| Antenna Interface |
SMA inner |
| Weight |
55/86g(Antenna include) |
| Size |
65mm*40mm*16mm |
| Spreading Method |
Frequency Hopping/Fixed Frequency、Transparent transmission、GMSK、2GFSK、4GFSK、QPSK |
| Forwarding Error Detection |
Hamming, BCH, Golay, Reed Solomon, Viterbi |
| Error Detection |
32 bits of CRC, ARQ |
| Range |
Reference distance: 40km(The transmission distance is different under different environments/ configurations; please refer to actual use) |
| Sensitivity |
-109 dBm @ 115.2 kbps-108 dBm @ 172.8 kbps-106 dBm @ 230.4 kbps |
| Antenna Gain |
3dBi |
| Serial Interface |
3.3V CMOS TTL |
| Link Rate |
345kbps Max |
| Baud Rate |
300bps to 230kbps(default:57600) |
| Operating Modes |
Point-to-Point, Relay Mode |
| Power Consumption |
Sleep：< 1mA (Future)Idle：20mARx：45mA to 98mATx Peak：2A |
| Interface |
Antenna: SMA inner needleSerial: GHR-06V-SUSB: Type-C POWER |
| Operation Temperature |
-40 ~ 85 ℃ |
| Data Interface |
GH1.25-6P+Type-C |
| Versiyon |
P8-Radio-Telemetry: P8 radio one set ,P8-Radio-Telemetry: P8 sky unit ,P8-Radio-Telemetry: P8 ground unit |