CUAV V5+/X7+ Carrier Base Board Flight Controller Pixhawk For FPV RC Quadcopter Helicopter
Yurtdışı Tedarik
| Ağırlık | 91 lbs |
|---|---|
| Baseboard |
V5+ base board, X7+/ X7+ pro base board |
| Main FMU Processor |
STM32F765 (32 Bit Arm Cortex -M7, 216MHz, 2MB FLASH, 512KB RAM) |
| IO Processor |
STM32F100 (32 Bit Arm Cortex -M3,24MHz, 8KB SRAM) |
| Accelerometer |
ICM-20602 / ICM-20689 / BMI055 |
| Gyroscope |
ICM-20602 / ICM-20689 / BMI055 |
| Magnetometer |
IST8310 |
| Barometer |
MS5611 |
| UART |
5 |
| I2C |
4 |
| SPI |
1 |
| CAN |
2 |
| ADC |
2 |
| PWM |
8 ~ 14 PWM outputs (6 from IO, 8 from FMU) |
| DSM/SBUS/RSSI |
1 |
| PPM IN |
1 |
| Power Interface |
2 |
| Safety Switch |
1 |
| DEBUG / F7 SWD |
1 |
| USB |
1 (Type-C) |
| TF slot |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
5V ± 0.25 V |
| Servo Voltage |
0 ~ 36 V |
| Working Temp |
-20 ~ 85℃ |
| Size |
85.5 × 42.0 × 33.0mm |
| Weight |
91g |
| Versiyon |
Baseboard: V5+ base board ,Baseboard: X7+/ X7+ pro base board |
CUAV X25 EVO Controller Open Source Drone Unmanned Systems
Yurtdışı Tedarik
| Ağırlık | 285 lbs |
|---|---|
| Weight |
110g |
| Dimensions |
20 × 10 × 10 cm |
| Material |
Metal |
| Main Processor |
STM32H753 |
| Acc & Gyro |
IIM-42653; IIM42652; IIM42653 |
| Compass |
RM3100 |
| Barometer |
ICP-20100/ BMP581 |
| UART Serial Port |
7 |
| Servo OUT |
16 |
| 5V PWM |
Support |
| Size |
76.5*45.45*32.2mm |
| Processor |
STM32H7 Arm° Cortex°-M7 480 MHz |
| Version |
X25 EVO |
| Gyro&Acce |
IIM-42653×2Gyro Sensing Range:±4OOO°/sAccel Sensing Range: ±32gIIM-42652Gyro Sensing Range:±2000°/sAccel Sensing Range: ±16g |
| PWM OUT |
16 |
| Power IN (CAN) |
2(5055670871-5055650801) |
| GPS Ports |
2 |
| TELEM Ports |
2 |
| UART4 Ports |
1 |
| RC IN |
1(PPM/SBUS/DSM,etc.) |
| DEBUG Ports (DSU) |
1 |
| Ethernet (ETH) |
1 |
| CAN Bus |
CAN1x3CAN2x2 |
| SPl6 Expansion |
1 |
| ADC 3V3 |
1 |
| ADC 6V6 |
1 |
| USB Ports |
1(Type-C) |
| I2C Ports |
3 |
| RSSI Ports |
1 |
| Power Module |
PMU 2 Lite |
| Input Voltage |
USB:4.75v~5.25vPMU 2Lite: 20V～70VPower: 1OV~18V |
| Operating Temperature |
-2OC～+85C |
CUAV X7+ Controller For PX4 APM Drone Hardware
Yurtdışı Tedarik
| Ağırlık | 2085 lbs |
|---|---|
| Weight |
1 kg |
| Dimensions |
30 × 20 × 10 cm |
| X7 FC options |
X7+ FC * 1 piece, X7+ & NEO 3X GPS / Set, X7+ & NEO 3 GPS / Set, X7+ & NEO 3 pro GPS / Set, X7+ & NEO 4 SE GPS / Set |
| Processor |
STM32F765 |
| Frequency |
480MHZ |
| RAM |
1024K |
| Flash |
2048K |
| PWM OUT |
14 ( M1~M12 Support DSHOT protocol) |
| I2C |
4 |
| Size |
77*45.5*39 |
| Power interface |
2(one for I2C one for analog) |
| ADC_IN |
2 |
| Radio Control Style |
RC Model |
| Accelerometer |
ICM-42688-P / ICM-20689 / ICM-20689 |
| Gyroscope |
ICM-42688-P / ICM-20689 / ICM-20689 |
| Compass |
RM3100 |
| Barometer |
MS5611 *2 |
| UART |
5 |
| RC IN |
1 (Support PPM SBUS DSM) |
| RSSI |
PWM or 3.3V analog voltage |
| CAN |
2 |
| Power IN |
2 (Power A for ADC protocol, Power C for CAN protocol) |
| Safety Switch |
1 |
| GPS |
2 |
| ADC |
1 |
| DEBUG |
1 |
| JATG |
1 |
| USB |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
| Versiyon |
X7-Fc-Options: X7+ FC * 1 piece ,X7-Fc-Options: X7+ & NEO 3X GPS / Set ,X7-Fc-Options: X7+ & NEO 3 GPS / Set ,X7-Fc-Options: X7+ & NEO 3 pro GPS / Set ,X7-Fc-Options: X7+ & NEO 4 SE GPS / Set |
CUAV X7+ Core Controller Open Source For PX4 Pixhawk
Yurtdışı Tedarik
| Ağırlık | 2085 lbs |
|---|---|
| Weight |
0.5 kg |
| Dimensions |
20 × 10 × 10 cm |
| Processor |
STM32F765 |
| Frequency |
480MHZ |
| RAM |
1024K |
| Flash |
2048K |
| PWM OUT |
14 ( M1~M12 Support DSHOT protocol) |
| I2C |
4 |
| Size |
77*45.5*39 |
| Power interface |
2(one for I2C one for analog) |
| ADC_IN |
2 |
| Radio Control Style |
RC Model |
| Accelerometer |
ICM-42688-P / ICM-20689 / ICM-20689 |
| Gyroscope |
ICM-42688-P / ICM-20689 / ICM-20689 |
| Compass |
RM3100 |
| Barometer |
MS5611 *2 |
| UART |
5 |
| RC IN |
1 (Support PPM SBUS DSM) |
| RSSI |
PWM or 3.3V analog voltage |
| CAN |
2 |
| Power IN |
2 (Power A for ADC protocol, Power C for CAN protocol) |
| Safety Switch |
1 |
| GPS |
2 |
| ADC |
1 |
| DEBUG |
1 |
| JATG |
1 |
| USB |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
CUAV X7+ Pro Core Controller Core Module For Customize Baseboard
Yurtdışı Tedarik
| Ağırlık | 2085 lbs |
|---|---|
| Weight |
1 kg |
| Dimensions |
30 × 20 × 10 cm |
| Material |
Metal |
| Tool Supplies |
Assembly Category |
| Upgrade Parts/Accessories |
Ardupilot |
| RC Parts & Accs |
Speed Controller |
| Size |
77*45.5*39mm |
| Technical parameters |
KV1100 |
| Remote Control Peripherals/Devices |
Remote controller |
| For Vehicle Type |
Airplanes |
| Four-wheel Drive Attributes |
Shell/Chassis/Wing/Head |
| Processor |
STM32H743(Arm Cortex -M7,480MHz,2MB FLASH, 1MB RAM) |
| Accelerometer |
ADIS16470 / ICM-42688-P / ICM-20689 |
| Gyroscope |
ADIS16470 / ICM-42688-P / ICM-20689 |
| Compass |
RM3100 |
| Barometer |
MS5611 *2 |
| UART |
5 |
| I2C |
6 (2 interfaces are integrated in GPS&SAFETY&UART4) |
| PWM OUT |
14 ( M1~M12 Support DSHOT protocol) |
| RC IN |
1 (Support PPM SBUS DSM) |
| RSSI |
PWM or 3.3V analog voltage |
| CAN |
2 |
| Power IN |
2 (Power A for ADC protocol, Power C for CAN protocol) |
| Safety Switch |
Integrated into the GPS & SAFETY port |
| GPS Port |
2 |
| ADC |
1 |
| DEBUG |
1 |
| JATG |
1 |
| USB |
1 |
| Rated Voltage |
14.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
CUAV X7+ Pro Pixhawk For PX4 APM Controller
Yurtdışı Tedarik
| Ağırlık | 2085 lbs |
|---|---|
| Weight |
1 kg |
| Dimensions |
30 × 20 × 10 cm |
| X7+ pro |
X7+ pro / please contact customer service for the stock availability, X7+ pro & NEO 3 GPS/ please contact customer service for the stock availability, X7+ pro & NEO 3 pro GPS / please contact customer service for the stock availability |
| Material |
Metal |
| Tool Supplies |
Assembly Category |
| Upgrade Parts/Accessories |
Ardupilot |
| RC Parts & Accs |
Speed Controller |
| Size |
77*45.5*39mm |
| Technical parameters |
KV1100 |
| Remote Control Peripherals/Devices |
Remote controller |
| For Vehicle Type |
Airplanes |
| Four-wheel Drive Attributes |
Shell/Chassis/Wing/Head |
| Processor |
STM32H743(Arm Cortex -M7,480MHz,2MB FLASH, 1MB RAM) |
| Accelerometer |
ADIS16470 / ICM-42688-P / ICM-20689 |
| Gyroscope |
ADIS16470 / ICM-42688-P / ICM-20689 |
| Compass |
RM3100 |
| Barometer |
MS5611 *2 |
| UART |
5 |
| I2C |
6 (2 interfaces are integrated in GPS&SAFETY&UART4) |
| PWM OUT |
14 ( M1~M12 Support DSHOT protocol) |
| RC IN |
1 (Support PPM SBUS DSM) |
| RSSI |
PWM or 3.3V analog voltage |
| CAN |
2 |
| Power IN |
2 (Power A for ADC protocol, Power C for CAN protocol) |
| Safety Switch |
Integrated into the GPS & SAFETY port |
| GPS Port |
2 |
| ADC |
1 |
| DEBUG |
1 |
| JATG |
1 |
| USB |
1 |
| Rated Voltage |
14.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
| Versiyon |
X7+ pro ,X7+ pro & NEO 3 GPS ,X7+ pro & NEO 3 pro GPS |
CUAV XB PRO Radio Telemetry Data Transmission Module
Yurtdışı Tedarik
| Ağırlık | 0.5 lbs |
|---|---|
| Weight |
0.5 kg |
| Dimensions |
20 × 10 × 5 cm |
| Tool Supplies |
Assembled class |
| Upgrade Parts/Accessories |
Hydraulic Transmission Box |
| RC Parts & Accs |
Transmitters |
| Size |
30*59*9mm |
| Use |
Vehicles & Remote Control Toys |
| Technical parameters |
Value10 |
| Remote Control Peripherals/Devices |
Receivers |
| For Vehicle Type |
Airplanes |
| Four-wheel Drive Attributes |
Assemblage |
| Power |
Battery |
| Frequency Range |
902 ~ 928 MHz |
| Processor |
ADF7023 transceiver，Cortex-X3 EFM32G230@28MHzProgrammers include：Freescale MC9s08QE32 |
| Antenna Selection |
wire.U.FlL and RPSMSA |
| Data Rate |
10kbps~200kbps, default 200kbps |
| Urban / Indoor Distance |
10kbps：up to 2000 feet (610 meters); 200kbps：up to 1000 feet |
| Outdoor/Suburban Distance |
10kbps：up to 15.5km200kbps：up to 6.5km |
| Maximum Power |
24dBm (250mw) software optional |
| Receiver Sensitivity |
101dBm@200kbps;110dBm@10kbps; |
| Data Interface |
UART(3V）.SPI |
| GPIO |
15 digital iO, 4 10-bit ADC inputs, 2 PWM outputs |
| Network Topology |
DIgiMEsh, relay, point-to-point, peer-to-peer network |
| Spread Spectrum |
FHSS (software optional) |
| Internal Storage |
32KB FLASH/2KB RAM |
| CPU Clock |
Up to 50MHz |
| Service Voltage |
4 ~ 7 V |
| Emission Current |
229 mA |
| Receive Current |
44 mA |
| Sleep Current |
3 uA |
| FCC（America） |
MCQ-XB900HP |
| iC（Canada） |
1846A—XB900HP |
| C-tick(Australia） |
Yes |
| Anatel（Brazil） |
Yes |
| IDA（Singapore） |
Yes |
CUAV XunWing X4 Copter | Drone Support Customize
Yurtdışı Tedarik
| Ağırlık | 25 lbs |
|---|---|
| Weight |
25 kg |
| Dimensions |
50 × 40 × 20 cm |
| Controller |
V5+ |
| GPS |
NEO V2 Pro |
| Video transmitter |
LTE-Link SE |
| Data Telemetry |
LTE-Link SE |
| Camera |
10x zoom |
| Propeller |
1655 |
| Motor |
3510 KV360 |
| Battery |
22.1V 6s 10000mAh |
| Remote |
SIYI XT32 |
| Aircraft size |
51×53×24（cm） |
| Wheelbase |
66cm |
| Frame material |
Carbon fiber (the tripod is made of plastic material) |
| load |
0.5kg |
| Remote distance |
3km |
| Data transmission distance |
Mobile network transmission, unlimited distance |
| Image transmission distance |
Mobile network transmission, unlimited distance |
| Maximum flight speed |
12m/s |
| Wind resistance level |
6 |
| Flight mileage |
12km |
| Flight time |
35 minutes |
| Scalable equipment |
RTK/Rangefinder etc./Optical flow, radar, ultrasonic etc. |
| Scope of application |
Aerial photography, inspection, live broadcast, etc. |
| Ground station support |
MissionPlanner，QGroundControl，CUAV GS，FeiGongTransmisson |
| Return error |
<1.5m |