45 sonuçtan 1-12 arası gösteriliyor
Uçuş Kontrol Kartı ve Pixhawk Otopilot Modelleri
Uçuş kontrol kartı, bir İHA’nın beynidir; sensör verilerini işleyerek motorları yönetir ve otonom uçuşu mümkün kılar. Pixhawk mimarisi, PX4 ve ArduPilot yazılımlarıyla uyumlu olarak dünya genelinde profesyonel drone projelerinin standardı haline gelmiştir.
Flyonic; CUAV, Holybro ve CubePilot gibi güvenilir markaların Pixhawk 6X, 6C ve Cube Orange serisi uçuş kontrol kartlarını sunar. Çift yedekli IMU, gelişmiş güç modülü desteği ve geniş çevre birimi uyumluluğuyla bu kartlar, kritik görevlerde güvenli uçuş sağlar.
Otonom Uçuş İçin Güvenilir Otopilot
Keşif, haritalama, tarım ve savunma projeleriniz için uygun uçuş kontrol kartı modellerini inceleyebilir, GPS, telemetri ve güç modülü entegrasyonu konusunda destek alabilirsiniz.
CUAV 7 Nano V2 Uçuş Kontrol Kartı – FPV ve Mikro Drone’lar için Kompakt FC
Yurtdışı Tedarik
| Weight |
33g |
|---|---|
| Dimensions |
10 × 10 × 5 cm |
| Processor |
STM32H753(Arm Cortex -M7,480MHz, 2MB FLASH) |
| Acce&Gyro |
IIM-42652/BMI088 |
| Compass |
IST8310 |
| UART |
5 |
| 12C |
3 |
| PWM Output |
14 |
| PWM Level |
3.3V/5V(8 CH) |
| RC IN |
1 |
| RSSI |
Support |
| Size |
30.5×25.5×31.8mm |
| Barometer |
ICP-20100/BMP581 |
| I2C |
3 |
| PWM OUT |
14 (Configurable for 3.3V / 5V) |
| CAN BUS |
2 |
| Power IN |
1 |
| Safety Switch |
1 |
| GPS 2 |
1 |
| ADC |
ADC3.3 & ADC6.6 |
| Debug |
FMU Debug |
| USB |
Type-C |
| Ethernet |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
| Detection Current(MAX) |
79.2 A |
| BEC OUT |
5.3V / 4A |
| Voltage and Current Accuracy |
±0.2V / 0.5A |
| Splitter |
Divided into six |
| Interfaces |
XT60 / GH1.25 6Pin |
| Main processor |
STM32H753 |
| Power |
1 |
| GPS&Safety |
1 |
| GPS2 |
1 |
| TELEM |
2 |
| TF card slot |
1 |
| Power Module |
7-Nano PDB |
CUAV 7-Nano V2 Open Source Controller Drone Accessories Kits
Yurtdışı Tedarik
| Weight |
33g |
|---|---|
| Dimensions |
10 × 10 × 5 cm |
| Processor |
STM32H753(Arm Cortex -M7,480MHz, 2MB FLASH) |
| Acce&Gyro |
IIM-42652/BMI088 |
| Compass |
IST8310 |
| UART |
5 |
| 12C |
3 |
| PWM Output |
14 |
| PWM Level |
3.3V/5V(8 CH) |
| RC IN |
1 |
| RSSI |
Support |
| Size |
30.5×25.5×31.8mm |
| Accessories Kit Options |
Choose an option7-Nano V2 Controller Standard7-Nano V2 Controller with PDB Power Module7-Nano V2 Controller with NEO 3X GNSS Module7-Nano V2 Controller with NEO 3 Pro GNSS Module7-Nano V2 Controller with NEO 4 SE GNSS Module7-Nano V2 Controller with NEO 4 Nano GNSS Module7-Nano V2 Controller with C-RTK 9 Ps(Rover Unit, Base Unit, Stand Combo)7-Nano V2 Controller with C-RTK 9 Ps(Base Unit) & C-RTK 2HP(Rover Unit)Clear |
| Barometer |
ICP-20100/BMP581 |
| I2C |
3 |
| PWM OUT |
14 (Configurable for 3.3V / 5V) |
| CAN BUS |
2 |
| Power IN |
1 |
| Safety Switch |
1 |
| GPS 2 |
1 |
| ADC |
ADC3.3 & ADC6.6 |
| Debug |
FMU Debug |
| USB |
Type-C |
| Ethernet |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
| Detection Current(MAX) |
79.2 A |
| BEC OUT |
5.3V / 4A |
| Voltage and Current Accuracy |
±0.2V / 0.5A |
| Splitter |
Divided into six |
| Interfaces |
XT60 / GH1.25 6Pin |
| Main processor |
STM32H753 |
| Power |
1 |
| GPS&Safety |
1 |
| GPS2 |
1 |
| TELEM |
2 |
| TF card slot |
1 |
| Power Module |
7-Nano PDB |
| Versiyon |
Accessories-Kit-Options: 7-Nano V2 Controller Standard ,Accessories-Kit-Options: 7-Nano V2 Controller with PDB Power Module ,Accessories-Kit-Options: 7-Nano V2 Controller with NEO 3X GNSS Module ,Accessories-Kit-Options: 7-Nano V2 Controller with NEO 3 Pro GNSS Module ,Accessories-Kit-Options: 7-Nano V2 Controller with NEO 4 SE GNSS Module ,Accessories-Kit-Options: 7-Nano V2 Controller with NEO 4 Nano GNSS Module ,Accessories-Kit-Options: 7-Nano V2 Controller with C-RTK 9 Ps(Rover Unit, Base Unit, Stand Combo) ,Accessories-Kit-Options: 7-Nano V2 Controller with C-RTK 9 Ps(Base Unit) & C-RTK 2HP(Rover Unit) |
CUAV Drone Pixhawk V5+ Drone Controller PX4 APM
Yurtdışı Tedarik
| Ağırlık | 1 lbs |
|---|---|
| Weight |
1 kg |
| Dimensions |
30 × 20 × 10 cm |
| V5+ Controller |
V5+ Controller/ please contact customer service for the stock availability, V5+ & NEO 3 GPS/please contact customer service for the stock availability, V5+ & NEO 3 pro GPS/ please contact customer service for the stock availability, V5+ & NEO 3X GPS/ please contact customer service for the stock availability |
| Tool Supplies |
Assembled class |
| Size |
85.5*42*33mm |
| Technical parameters |
KV1100 |
| For Vehicle Type |
Airplanes |
| Four-wheel Drive Attributes |
Assemblage |
| Power |
Battery |
| Scale |
1:5 |
| Main processor |
STM32F765 (32 Bit Arm Cortex-M7, 216MHz, 2MB flash, 512KB RAM) |
| Coprocessor |
STM32F100 (32 Bit Arm Cortex R-M3, 24MHZ, 8KB SRAM) |
| Accelerometer |
ICM-20602/ICM-20689/BMI055 |
| Gyro |
ICM-20602/ICM-20689/BMI055 |
| Compass |
IST8310 |
| Barometer |
MS5611*2 |
| UART |
5 |
| I2C |
4 |
| SPI |
1 |
| CAN |
2 |
| ADC |
2 |
| PWM out |
14 |
| PWM in |
6 |
| PPM in |
1 |
| DSM/SBUS/RSSI |
1 |
| Power 1 |
1 |
| Power 2 |
1 |
| Safety switch |
1 |
| Buzzer |
1 |
| USB-TYPE-C |
1 |
| TF slot |
1 |
| Firmware |
Px4/Ardupilot |
| Model |
Copter/Plane/Helicopter/NTOL/unmanned vehicle/Rover, etc. |
| Versiyon |
V5-Controller: V5+ Controller/ please contact customer service for the stock availability ,V5-Controller: V5+ & NEO 3 GPS/please contact customer service for the stock availability ,V5-Controller: V5+ & NEO 3 pro GPS/ please contact customer service for the stock availability ,V5-Controller: V5+ & NEO 3X GPS/ please contact customer service for the stock availability |
CUAV New FPV Drone Small Size Cube 7 Nano Controller
Yurtdışı Tedarik
| Ağırlık | 2085 lbs |
|---|---|
| Weight |
0.3 kg |
| Dimensions |
20 × 10 × 10 cm |
| 7 Nano |
7 Nano-VDM/ please contact customer service for the stock availability, 7 Nano-PDB/ please contact customer service for the stock availability |
| Material |
Metal |
| Tool Supplies |
Assembly Category |
| Upgrade Parts/Accessories |
Autopilot |
| RC Parts & Accs |
Speed Controller |
| Size |
77*45.5*39mm |
| Technical parameters |
KV1100 |
| Remote Control Peripherals/Devices |
Remote controller |
| For Vehicle Type |
Airplanes |
| Certification |
CE |
| Type |
Airplane |
| Processor |
STM32H753(Arm Cortex -M7,480MHz, 2MB FLASH) |
| Acce&Gyro |
IIM-42652/BMI088 |
| Compass |
IST8310 |
| Barometer |
ICP-20100/BMP581 |
| I2C |
3 |
| PWM OUT |
14 (Configurable for 3.3V / 5V) |
| RC IN |
1 (Support PPM SBUS DSM) |
| RSSI |
PWM or 3.3V analog voltage |
| CAN BUS |
2 |
| Power IN |
1 |
| Safety Switch |
1 |
| GPS 2 |
1 |
| ADC |
ADC3.3 & ADC6.6 |
| DEBUG |
1 |
| USB |
Type-C |
| Ethernet |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
| Detection Current(MAX) |
79.2 A |
| BEC OUT |
5.3V / 4A |
| Voltage and Current Accuracy |
±0.2V / 0.5A |
| Splitter |
Divided into six |
| Interfaces |
XT60 / GH1.25 6Pin |
| Versiyon |
7-Nano: 7 Nano-VDM/ please contact customer service for the stock availability ,7-Nano: 7 Nano-PDB/ please contact customer service for the stock availability |
CUAV New Pixhawk V6X controller
Yurtdışı Tedarik
| Ağırlık | 2085 lbs |
|---|---|
| Weight |
0.3 kg |
| Dimensions |
20 × 10 × 10 cm |
| V6X |
V6X/ please contact customer service for the stock availability, V6X & NEO 3 GPS/ please contact customer service for the stock availability, V6X & NEO 3 pro GPS/ please contact customer service for the stock availability, V6X & NEO 3X GPS/ please contact customer service for the stock availability |
| Hardware tandrard |
Pixhawk FMUV6X |
| Processor |
STM32H753IIK6 |
| Coprocessor |
STM32F10X |
| Compass |
RM3100 |
| Barometer |
2xICP-20100 |
| Size & Weight |
45 x 90 x 29.2mm 98g |
| Operating Voltage |
4.75~5.45V |
| TELEM |
3 |
| Operating temperature |
-20~85℃ |
| FMU Processor |
STM32H753(Arm® Cortex®-M7,480MHz,2MB FLASH, 1MB RAM) |
| IO Processor |
STM32F103(Arm® Cortex®-M3,72MHz) |
| Accelerometer |
ICM-42688-P/ICM-20649/BMI088 |
| Gyroscope |
ICM-42688-P/ICM-20649/BMI088 |
| PWM OUT |
16 |
| Power（CAN） |
2 |
| Power(SMBUS） |
2（5055680681-5055650601） |
| GPS |
2(one is equipped with I2C and a safety switch (GPS1), and the other is equipped with I2C (GPS2)) |
| CAN |
2 |
| PPM RC |
1 |
| SBUS/DSM/RSSI |
1 |
| SBUS OUT |
1 |
| FMU DEBUG |
1 |
| IO DEBUG |
1 |
| Ethernet |
1 |
| SPI |
1(SPI6 interface，for expanding external sensors) |
| ADIO |
1 (ADC3.3 / ADC6.6) |
| UART4 |
1 |
| USB |
2 (Type-C × 1 GH1.25 × 1) |
| TF Slot |
1 |
| Rated Voltage |
4.75 ~ 5.70 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 9.9 V |
| Working Temp |
-20 ~ 85 ℃ |
| Size |
45.0 × 90.0 × 29.2mm |
| Versiyon |
V6X: V6X/ please contact customer service for the stock availability ,V6X: V6X & NEO 3 GPS/ please contact customer service for the stock availability ,V6X: V6X & NEO 3 pro GPS/ please contact customer service for the stock availability ,V6X: V6X & NEO 3X GPS/ please contact customer service for the stock availability |
CUAV Nora+ Controller For PIX and APM Drone Hardware
Yurtdışı Tedarik
| Ağırlık | 2085 lbs |
|---|---|
| Weight |
1 kg |
| Dimensions |
30 × 20 × 10 cm |
| Nora FC options |
Nora+ FC * 1 piece, Nora+ & NEO 3X GPS / Set, Nora+ & NEO 3 GPS / Set, Nora+ & NEO 3 pro GPS / Set, Nora+ & NEO 4 SE GPS / Set |
| Material |
Metal |
| Tool Supplies |
Assembly class |
| Upgrade Parts/Accessories |
Flight controller |
| RC Parts & Accs |
Speed Controller |
| Size |
64*46*22mm |
| Use |
Vehicles & Remote Control Toys |
| Technical parameters |
KV1100 |
| Remote Control Peripherals/Devices |
Remote Controller |
| For Vehicle Type |
Helicopter |
| Four-wheel Drive Attributes |
Shell/Chassis/Wing/Head |
| Processor |
STM32H743/STM32H753(Arm Cortex-M7,480MHz, 2MB FLASH, 1MB RAM) |
| Accelerometer |
ICM-42688-P / ICM-20689 / BMI088 |
| Gyroscope |
ICM-42688-P / ICM-20689 / BMI088 |
| Compass |
RM3100 |
| Barometer |
MS5611 *2 |
| UART |
5 |
| I2C |
6 (2 interfaces are integrated in GPS&SAFETY&UART4) |
| PWM OUT |
14 ( M1~M12 Support DSHOT protocol) |
| RC IN |
1 (Support PPM SBUS DSM) |
| RSSI |
PWM or 3.3V analog voltage |
| CAN |
2 |
| Power IN |
2 (Power A for ADC protocol, Power C for CAN protocol) |
| Safety Switch |
1 |
| GPS Port |
2（UART4 can be used as GPS2 interface) |
| DEBUG |
1 |
| JATG |
1 |
| USB |
2 (Type-C × 1 GH1.25 × 1) |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
| Versiyon |
Nora-Fc-Options: Nora+ FC * 1 piece ,Nora-Fc-Options: Nora+ & NEO 3X GPS / Set ,Nora-Fc-Options: Nora+ & NEO 3 GPS / Set ,Nora-Fc-Options: Nora+ & NEO 3 pro GPS / Set ,Nora-Fc-Options: Nora+ & NEO 4 SE GPS / Set |
CUAV RTK One-to-Multiple Package A | Nora+ Controller C-RTK 9Ps P9 Telemetry
Yurtdışı Tedarik
| Ağırlık | 1260 lbs |
|---|---|
| Weight |
2 kg |
| Dimensions |
30 × 30 × 20 cm |
| Package Options |
RTK One-to-Multiple Package A, Contact customer service to freely match and combine |
| Processor |
STM32H743/STM32H753(Arm Cortex-M7,480MHz, 2MB FLASH, 1MB RAM) |
| Accelerometer |
ICM-42688-P / ICM-20689 / BMI088 |
| Gyroscope |
ICM-42688-P / ICM-20689 / BMI088 |
| Compass |
RM3100 |
| Barometer |
MS5611 *2 |
| UART |
5 |
| I2C |
6 (2 interfaces are integrated in GPS&SAFETY&UART4) |
| PWM OUT |
14 ( M1~M12 Support DSHOT protocol) |
| RC IN |
1 (Support PPM SBUS DSM) |
| RSSI |
PWM or 3.3V analog voltage |
| CAN |
2 |
| Power IN |
2 (Power A for ADC protocol, Power C for CAN protocol) |
| Safety Switch |
1 |
| GPS Port |
2（UART4 can be used as GPS2 interface) |
| DEBUG |
1 |
| JATG |
1 |
| USB |
2 (Type-C × 1 GH1.25 × 1) |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
| Size |
85.5 × 42.0 × 33.0mm |
| Receiver |
184 channelZED-F9P(ublox) |
| GNSS |
GPS、BDS、GALILEO、GLONASS |
| Concurrent GNSS |
4 |
| GNSS Bands |
GPS-L1C/A,GPS-L2C,GLONASS-L10F,GLONASS-L2OF,GALILEO-E1B/C,GALILEO-E5b,BDS-B11,BDS-B2I,QZSS-L1CIA,QZSS-L2C, |
| Nav.update rate |
RTK20Hz; RAW25Hz; PVT25Hz (The maximum limit is related to the concurrency setting) |
| Position Accuracy |
RTK:0.01m+1ppm CEPGPS:1.5m CEP;SBAS:1.0m CEP |
| Convergence Time |
RTK<60s |
| Acquisition |
Cold start<24sHot start<1s |
| Sensitivity |
Tracking and nav-167dBmCold start-148 dBmHot start-157 dBmReacquisition -160 dBm |
| Anti-jamming |
Active CW detection and removal, Onboard band pass filter |
| Anti-spoofing |
Advanced anti-spoofing algorithms |
| Antenna Gain |
Rover:2dBi Base:5dBi |
| PPK |
Not Support |
| GPS Heading |
Support(requirestwo C-RTK9Ps);heading accuracy:0.4edg(reference value) |
| Base/Rover Role Swap |
Support |
| Protocols |
NMEA、UBX binary、RTCM 3.x |
| Operating Voltage |
12 ~ 60V |
| Operating Temperature |
-40～85℃ |
| Working Frequency |
902 ~ 928 MHz |
| Transmission Technology |
Frequency Hopping |
| Transfer Protocol |
Transparent Transmission |
| Forwarding Error Detection |
Hamming /BCH/Golay/Reed-Solomon |
| Error Detecting |
Error Detection 32 bits of CRC, ARQ |
| Encrypt |
Optional (see AES option) |
| Range |
Reference distance: 40km(The transmission distance is different under different environments/ configurations, please refer to actual use) |
| Output Power |
100mW ~ 1W (20 ~ 30dBm)（Default：1W) |
| Serial Interface |
3.3V CMOS TTL |
| Baud Rate |
Up to 230.4kbps;57600（Default） |
| Link Rate |
115 ~ 276 kbps |
| Operating Modes |
Auto Routing, Store and Forward, Self Healing, Packet Routing Modes |
| Power Consumption |
Sleep < 1mAIdle < 3.5mARX：35mA ~ 80mATX：800mA ~ 1200mA |
| Interface |
Serial: GHR-06V-SAntenna: SMA inner needleUSB: Type-CPower: TX30PW-M |
CUAV V5+/X7+ Carrier Base Board Flight Controller Pixhawk For FPV RC Quadcopter Helicopter
Yurtdışı Tedarik
| Ağırlık | 91 lbs |
|---|---|
| Baseboard |
V5+ base board, X7+/ X7+ pro base board |
| Main FMU Processor |
STM32F765 (32 Bit Arm Cortex -M7, 216MHz, 2MB FLASH, 512KB RAM) |
| IO Processor |
STM32F100 (32 Bit Arm Cortex -M3,24MHz, 8KB SRAM) |
| Accelerometer |
ICM-20602 / ICM-20689 / BMI055 |
| Gyroscope |
ICM-20602 / ICM-20689 / BMI055 |
| Magnetometer |
IST8310 |
| Barometer |
MS5611 |
| UART |
5 |
| I2C |
4 |
| SPI |
1 |
| CAN |
2 |
| ADC |
2 |
| PWM |
8 ~ 14 PWM outputs (6 from IO, 8 from FMU) |
| DSM/SBUS/RSSI |
1 |
| PPM IN |
1 |
| Power Interface |
2 |
| Safety Switch |
1 |
| DEBUG / F7 SWD |
1 |
| USB |
1 (Type-C) |
| TF slot |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
5V ± 0.25 V |
| Servo Voltage |
0 ~ 36 V |
| Working Temp |
-20 ~ 85℃ |
| Size |
85.5 × 42.0 × 33.0mm |
| Weight |
91g |
| Versiyon |
Baseboard: V5+ base board ,Baseboard: X7+/ X7+ pro base board |
CUAV X25 EVO Controller Open Source Drone Unmanned Systems
Yurtdışı Tedarik
| Ağırlık | 285 lbs |
|---|---|
| Weight |
110g |
| Dimensions |
20 × 10 × 10 cm |
| Material |
Metal |
| Main Processor |
STM32H753 |
| Acc & Gyro |
IIM-42653; IIM42652; IIM42653 |
| Compass |
RM3100 |
| Barometer |
ICP-20100/ BMP581 |
| UART Serial Port |
7 |
| Servo OUT |
16 |
| 5V PWM |
Support |
| Size |
76.5*45.45*32.2mm |
| Processor |
STM32H7 Arm° Cortex°-M7 480 MHz |
| Version |
X25 EVO |
| Gyro&Acce |
IIM-42653×2Gyro Sensing Range:±4OOO°/sAccel Sensing Range: ±32gIIM-42652Gyro Sensing Range:±2000°/sAccel Sensing Range: ±16g |
| PWM OUT |
16 |
| Power IN (CAN) |
2(5055670871-5055650801) |
| GPS Ports |
2 |
| TELEM Ports |
2 |
| UART4 Ports |
1 |
| RC IN |
1(PPM/SBUS/DSM,etc.) |
| DEBUG Ports (DSU) |
1 |
| Ethernet (ETH) |
1 |
| CAN Bus |
CAN1x3CAN2x2 |
| SPl6 Expansion |
1 |
| ADC 3V3 |
1 |
| ADC 6V6 |
1 |
| USB Ports |
1(Type-C) |
| I2C Ports |
3 |
| RSSI Ports |
1 |
| Power Module |
PMU 2 Lite |
| Input Voltage |
USB:4.75v~5.25vPMU 2Lite: 20V～70VPower: 1OV~18V |
| Operating Temperature |
-2OC～+85C |
CUAV X7+ Controller For PX4 APM Drone Hardware
Yurtdışı Tedarik
| Ağırlık | 2085 lbs |
|---|---|
| Weight |
1 kg |
| Dimensions |
30 × 20 × 10 cm |
| X7 FC options |
X7+ FC * 1 piece, X7+ & NEO 3X GPS / Set, X7+ & NEO 3 GPS / Set, X7+ & NEO 3 pro GPS / Set, X7+ & NEO 4 SE GPS / Set |
| Processor |
STM32F765 |
| Frequency |
480MHZ |
| RAM |
1024K |
| Flash |
2048K |
| PWM OUT |
14 ( M1~M12 Support DSHOT protocol) |
| I2C |
4 |
| Size |
77*45.5*39 |
| Power interface |
2(one for I2C one for analog) |
| ADC_IN |
2 |
| Radio Control Style |
RC Model |
| Accelerometer |
ICM-42688-P / ICM-20689 / ICM-20689 |
| Gyroscope |
ICM-42688-P / ICM-20689 / ICM-20689 |
| Compass |
RM3100 |
| Barometer |
MS5611 *2 |
| UART |
5 |
| RC IN |
1 (Support PPM SBUS DSM) |
| RSSI |
PWM or 3.3V analog voltage |
| CAN |
2 |
| Power IN |
2 (Power A for ADC protocol, Power C for CAN protocol) |
| Safety Switch |
1 |
| GPS |
2 |
| ADC |
1 |
| DEBUG |
1 |
| JATG |
1 |
| USB |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
| Versiyon |
X7-Fc-Options: X7+ FC * 1 piece ,X7-Fc-Options: X7+ & NEO 3X GPS / Set ,X7-Fc-Options: X7+ & NEO 3 GPS / Set ,X7-Fc-Options: X7+ & NEO 3 pro GPS / Set ,X7-Fc-Options: X7+ & NEO 4 SE GPS / Set |
CUAV X7+ Core Controller Open Source For PX4 Pixhawk
Yurtdışı Tedarik
| Ağırlık | 2085 lbs |
|---|---|
| Weight |
0.5 kg |
| Dimensions |
20 × 10 × 10 cm |
| Processor |
STM32F765 |
| Frequency |
480MHZ |
| RAM |
1024K |
| Flash |
2048K |
| PWM OUT |
14 ( M1~M12 Support DSHOT protocol) |
| I2C |
4 |
| Size |
77*45.5*39 |
| Power interface |
2(one for I2C one for analog) |
| ADC_IN |
2 |
| Radio Control Style |
RC Model |
| Accelerometer |
ICM-42688-P / ICM-20689 / ICM-20689 |
| Gyroscope |
ICM-42688-P / ICM-20689 / ICM-20689 |
| Compass |
RM3100 |
| Barometer |
MS5611 *2 |
| UART |
5 |
| RC IN |
1 (Support PPM SBUS DSM) |
| RSSI |
PWM or 3.3V analog voltage |
| CAN |
2 |
| Power IN |
2 (Power A for ADC protocol, Power C for CAN protocol) |
| Safety Switch |
1 |
| GPS |
2 |
| ADC |
1 |
| DEBUG |
1 |
| JATG |
1 |
| USB |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
CUAV X7+ Pro Core Controller Core Module For Customize Baseboard
Yurtdışı Tedarik
| Ağırlık | 2085 lbs |
|---|---|
| Weight |
1 kg |
| Dimensions |
30 × 20 × 10 cm |
| Material |
Metal |
| Tool Supplies |
Assembly Category |
| Upgrade Parts/Accessories |
Ardupilot |
| RC Parts & Accs |
Speed Controller |
| Size |
77*45.5*39mm |
| Technical parameters |
KV1100 |
| Remote Control Peripherals/Devices |
Remote controller |
| For Vehicle Type |
Airplanes |
| Four-wheel Drive Attributes |
Shell/Chassis/Wing/Head |
| Processor |
STM32H743(Arm Cortex -M7,480MHz,2MB FLASH, 1MB RAM) |
| Accelerometer |
ADIS16470 / ICM-42688-P / ICM-20689 |
| Gyroscope |
ADIS16470 / ICM-42688-P / ICM-20689 |
| Compass |
RM3100 |
| Barometer |
MS5611 *2 |
| UART |
5 |
| I2C |
6 (2 interfaces are integrated in GPS&SAFETY&UART4) |
| PWM OUT |
14 ( M1~M12 Support DSHOT protocol) |
| RC IN |
1 (Support PPM SBUS DSM) |
| RSSI |
PWM or 3.3V analog voltage |
| CAN |
2 |
| Power IN |
2 (Power A for ADC protocol, Power C for CAN protocol) |
| Safety Switch |
Integrated into the GPS & SAFETY port |
| GPS Port |
2 |
| ADC |
1 |
| DEBUG |
1 |
| JATG |
1 |
| USB |
1 |
| Rated Voltage |
14.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |