CUAV 7 Nano V2 Uçuş Kontrol Kartı – FPV ve Mikro Drone’lar için Kompakt FC
Stoktan Teslim
25,500.00 ₺ 30,600.00 ₺| Weight |
33g |
|---|---|
| Dimensions |
10 × 10 × 5 cm |
| Processor |
STM32H753(Arm Cortex -M7,480MHz, 2MB FLASH) |
| Acce&Gyro |
IIM-42652/BMI088 |
| Compass |
IST8310 |
| UART |
5 |
| 12C |
3 |
| PWM Output |
14 |
| PWM Level |
3.3V/5V(8 CH) |
| RC IN |
1 |
| RSSI |
Support |
| Size |
30.5×25.5×31.8mm |
| Barometer |
ICP-20100/BMP581 |
| I2C |
3 |
| PWM OUT |
14 (Configurable for 3.3V / 5V) |
| CAN BUS |
2 |
| Power IN |
1 |
| Safety Switch |
1 |
| GPS 2 |
1 |
| ADC |
ADC3.3 & ADC6.6 |
| Debug |
FMU Debug |
| USB |
Type-C |
| Ethernet |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
| Detection Current(MAX) |
79.2 A |
| BEC OUT |
5.3V / 4A |
| Voltage and Current Accuracy |
±0.2V / 0.5A |
| Splitter |
Divided into six |
| Interfaces |
XT60 / GH1.25 6Pin |
| Main processor |
STM32H753 |
| Power |
1 |
| GPS&Safety |
1 |
| GPS2 |
1 |
| TELEM |
2 |
| TF card slot |
1 |
| Power Module |
7-Nano PDB |
CUAV HV_PM 10-60V XT60 Güç Modülü – Pixhawk Uyumlu
Stoktan Teslim
7,395.00 ₺ 8,874.00 ₺| HV_PM Power Module * 2Pcs |
For pixhack version * 2 Pcs, For pixhawk version* 2 Pcs, For V5+/nano version * 2 Pcs, For X7/Nora version * 2 Pcs |
|---|---|
| Material |
Plastic ABS |
| Tool Supplies |
Assembled class |
| Upgrade Parts/Accessories |
Power |
| RC Parts & Accs |
Servo Accessories |
| Size |
21X20X10mm |
| Technical parameters |
KV1100 |
| Remote Control Peripherals/Devices |
Remote controller |
| Power Module |
Ammeter |
| Versiyon |
Hv Pm-Power-Module-2Pcs: For pixhack version * 2 Pcs ,Hv Pm-Power-Module-2Pcs: For pixhawk version* 2 Pcs ,Hv Pm-Power-Module-2Pcs: For V5+/nano version * 2 Pcs ,Hv Pm-Power-Module-2Pcs: For X7/Nora version * 2 Pcs |
CUAV NEO 3 Pro GPS Module | GNSS U-BLOX M9N CAN BUS
Stoktan Teslim
17,340.00 ₺ 20,808.00 ₺| Ağırlık | 33 lbs |
|---|---|
| Weight |
33g |
| Dimensions |
10 × 10 × 5 cm |
| Processor |
STM32F412 |
| Sensor |
Compass: IST8310 ; Barometer: MS5611 |
| RGB Driver |
NCP5623C |
| Buzzer |
Passive Buzzer |
| Safety Switch |
Physical Button |
| GNSS Receiver |
UBLOX M9N |
| Number of Concurrent GNSS |
4(BDS、GALILEO、GLONASS、GPS) |
| Frequency Band |
GPS:L1C/AGLONASS:L10FBDS:B11GALILEO:E1B/C |
| GNSS Augmentation System |
SBAS:WAAS,EGNOS,MSASQZSS:L1s(SAIF)25Hz(Max) |
| Horizontal Accuracy |
2.0m (Highest measured value is 0.7m) |
| Speed Accuracy |
0.05m/s |
| Acquisition |
Cold Start:24sHotStart:2sAided Start:2s |
| Number of Satellites (MAX) |
32+ |
| Sensitivity |
Tracking&Nav:-167dBmColdstart&Hotstart:-148dBmReacquisition:-160dBm |
| Protocol |
UAVCAN |
| Wave Filtering |
SAW+LNA+SAW |
| Supported Controller |
CUAV series; Pixhawk series |
| Port Type |
GHR-04V-S |
| InputVoltage |
4.7~5.2V |
| Operating Temperature |
-10~70°℃ |
| Size |
60*60*16MM |
| NEO 3 Pro GPS MOQ Options |
Choose an optionNEO 3 Pro * 1 PieceNEO 3 Pro * 5pcsNEO 3 Pro * 10pcsNEO 3 Pro & Pixhawk V6X V2 ControllerNEO 3 Pro & 7-Nano V2 ControllerClear |
| Compass |
RM3100 |
| Barometer |
MS5611 |
| Nav. update rate |
25Hz(Max) |
| Number of Satellites(MAX) |
32+ |
| Anti-Electromagnetic/ Radio Frequency Interference |
EMI+RFI |
| Upgrade firmware |
Support |
| Support Control Type |
ArduPilot/PX4 |
| Input Voltage |
4.7-5.2V |
| Versiyon |
Neo-3-Pro-Gps-Moq-Options: NEO 3 Pro * 1 Piece ,Neo-3-Pro-Gps-Moq-Options: NEO 3 Pro * 5pcs ,Neo-3-Pro-Gps-Moq-Options: NEO 3 Pro * 10pcs ,Neo-3-Pro-Gps-Moq-Options: NEO 3 Pro & Pixhawk V6X V2 Controller ,Neo-3-Pro-Gps-Moq-Options: NEO 3 Pro & 7-Nano V2 Controller |
CUAV X25 EVO Uçuş Kontrol Kartı
Stoktan Teslim
68,391.00 ₺ 82,069.20 ₺| Ağırlık | 285 lbs |
|---|---|
| Weight |
110g |
| Dimensions |
20 × 10 × 10 cm |
| Material |
Metal |
| Main Processor |
STM32H753 |
| Acc & Gyro |
IIM-42653; IIM42652; IIM42653 |
| Compass |
RM3100 |
| Barometer |
ICP-20100/ BMP581 |
| UART Serial Port |
7 |
| Servo OUT |
16 |
| 5V PWM |
Support |
| Size |
76.5*45.45*32.2mm |
| Processor |
STM32H7 Arm° Cortex°-M7 480 MHz |
| Version |
X25 EVO |
| Gyro&Acce |
IIM-42653×2Gyro Sensing Range:±4OOO°/sAccel Sensing Range: ±32gIIM-42652Gyro Sensing Range:±2000°/sAccel Sensing Range: ±16g |
| PWM OUT |
16 |
| Power IN (CAN) |
2(5055670871-5055650801) |
| GPS Ports |
2 |
| TELEM Ports |
2 |
| UART4 Ports |
1 |
| RC IN |
1(PPM/SBUS/DSM,etc.) |
| DEBUG Ports (DSU) |
1 |
| Ethernet (ETH) |
1 |
| CAN Bus |
CAN1x3CAN2x2 |
| SPl6 Expansion |
1 |
| ADC 3V3 |
1 |
| ADC 6V6 |
1 |
| USB Ports |
1(Type-C) |
| I2C Ports |
3 |
| RSSI Ports |
1 |
| Power Module |
PMU 2 Lite |
| Input Voltage |
USB:4.75v~5.25vPMU 2Lite: 20V～70VPower: 1OV~18V |
| Operating Temperature |
-2OC～+85C |
CUAV 5015 12S UAV Motor
Yurtdışı Tedarik
17,340.00 ₺ 20,808.00 ₺| Ağırlık | 0.3 lbs |
|---|---|
| Weight |
0.3 kg |
| Dimensions |
20 × 10 × 10 cm |
CUAV 7-Nano V2 Open Source Controller Drone Accessories Kits
Yurtdışı Tedarik
Fiyat aralığı: 22,440.00 ₺ - 25,500.00 ₺| Weight |
33g |
|---|---|
| Dimensions |
10 × 10 × 5 cm |
| Processor |
STM32H753(Arm Cortex -M7,480MHz, 2MB FLASH) |
| Acce&Gyro |
IIM-42652/BMI088 |
| Compass |
IST8310 |
| UART |
5 |
| 12C |
3 |
| PWM Output |
14 |
| PWM Level |
3.3V/5V(8 CH) |
| RC IN |
1 |
| RSSI |
Support |
| Size |
30.5×25.5×31.8mm |
| Accessories Kit Options |
Choose an option7-Nano V2 Controller Standard7-Nano V2 Controller with PDB Power Module7-Nano V2 Controller with NEO 3X GNSS Module7-Nano V2 Controller with NEO 3 Pro GNSS Module7-Nano V2 Controller with NEO 4 SE GNSS Module7-Nano V2 Controller with NEO 4 Nano GNSS Module7-Nano V2 Controller with C-RTK 9 Ps(Rover Unit, Base Unit, Stand Combo)7-Nano V2 Controller with C-RTK 9 Ps(Base Unit) & C-RTK 2HP(Rover Unit)Clear |
| Barometer |
ICP-20100/BMP581 |
| I2C |
3 |
| PWM OUT |
14 (Configurable for 3.3V / 5V) |
| CAN BUS |
2 |
| Power IN |
1 |
| Safety Switch |
1 |
| GPS 2 |
1 |
| ADC |
ADC3.3 & ADC6.6 |
| Debug |
FMU Debug |
| USB |
Type-C |
| Ethernet |
1 |
| Rated Voltage |
4.5 ~ 5.5 V |
| USB Voltage |
4.75 ~ 5.25 V |
| Servo Voltage |
0 ~ 10 V |
| Working Temp |
-20 ~ 85 ℃ |
| Humidity |
5% ~ 95%（Does not condense） |
| Detection Current(MAX) |
79.2 A |
| BEC OUT |
5.3V / 4A |
| Voltage and Current Accuracy |
±0.2V / 0.5A |
| Splitter |
Divided into six |
| Interfaces |
XT60 / GH1.25 6Pin |
| Main processor |
STM32H753 |
| Power |
1 |
| GPS&Safety |
1 |
| GPS2 |
1 |
| TELEM |
2 |
| TF card slot |
1 |
| Power Module |
7-Nano PDB |
| Versiyon |
Accessories-Kit-Options: 7-Nano V2 Controller Standard ,Accessories-Kit-Options: 7-Nano V2 Controller with PDB Power Module ,Accessories-Kit-Options: 7-Nano V2 Controller with NEO 3X GNSS Module ,Accessories-Kit-Options: 7-Nano V2 Controller with NEO 3 Pro GNSS Module ,Accessories-Kit-Options: 7-Nano V2 Controller with NEO 4 SE GNSS Module ,Accessories-Kit-Options: 7-Nano V2 Controller with NEO 4 Nano GNSS Module ,Accessories-Kit-Options: 7-Nano V2 Controller with C-RTK 9 Ps(Rover Unit, Base Unit, Stand Combo) ,Accessories-Kit-Options: 7-Nano V2 Controller with C-RTK 9 Ps(Base Unit) & C-RTK 2HP(Rover Unit) |
CUAV C-RID Drone Remote ID Broadcast Module
Yurtdışı Tedarik
9,180.00 ₺ 11,016.00 ₺| Ağırlık | 475.2 lbs |
|---|---|
| Weight |
0.0155 kg |
| Dimensions |
30 × 38 × 10 cm |
| C-RID Remote ID Options |
C-RID * 3 Pcs, C-RID & NEO 3 GPS / Set, C-RID & NEO 3 Pro GPS / Set, C-RID & NEO 3X GPS / Set |
| Processor |
Xtensa32-bit LX7dual-coreprocessor |
| Transmit Power |
20dBm |
| Communication Frequency |
2.4GHz |
| Communication Mode |
Wi-Fi or Bluetooth Broadcast |
| Range |
>300m |
| Protocol |
DroneCAN/ UART(MAVLink) |
| Firmware |
ArduRemotelD (Support OTA Online Upgrade) |
| Ports |
1xCAN （4-pinGH1.25）1xUART（4-pinGH1.25)1×ANT(MMCX) |
| Shell Material |
Aviation Aluminum |
| Operating Voltage |
4.7~5.2V |
| LED (main) Status |
Off:Not connected or not workingConstant Red:Configuration is not completed(disarming conditionsarenotmet)Constant Green:Configuration is successful,unlockable |
| Size |
Main: 24×38x10mmIncluding Fixing Hole: 38x38x10mm |
| Versiyon |
C-Rid-Remote-Id-Options: C-RID * 3 Pcs ,C-Rid-Remote-Id-Options: C-RID & NEO 3 GPS / Set ,C-Rid-Remote-Id-Options: C-RID & NEO 3 Pro GPS / Set ,C-Rid-Remote-Id-Options: C-RID & NEO 3X GPS / Set |
CUAV C-RTK 3 G5 Anti-Jamming Spoofing GNSS Module for Drone
Yurtdışı Tedarik
59,160.00 ₺ 70,992.00 ₺| Ağırlık | 36 lbs |
|---|---|
| Weight |
0.5 kg |
| Dimensions |
10 × 10 × 5 cm |
| Processor |
STM32H5 Arm°Cortex-M33 250 MHz |
| Hardware Channel |
789 pcs |
| Support Constellation and Band |
GPS: L1C/A 、L2C 、L2PY 、L5 、L1CGLONASS: L1CA 、L2CA 、L2P 、L3 CDMABeiDou: B11 、B1C 、B2a 、B2I 、B31 、B2bGalileo: E1 、E5a 、E5b 、E6QZSS: L1C/A 、L1 C/B 、L2C 、L5 、L6 |
| Antenna Support |
Dual Antenna (configurable single/dual antenna working mode) |
| GNSS+ Technical Kit |
AIM+(anti-jamming/ anti-spoofing),LOCK+(vibration& shock resistance),APME+(multipath mitigation),IONO+(ionospheric protection),RAIM+(integrity monitoring) |
| Support Service |
Galileo HAS High-Precision Service (look-ahead function, enabled upon software update), Galileo OSNMA Service |
| Raw Data Output |
Support/ TF Card Recoding |
| Positioning Accuracy |
Standalone Accuracy: Horizontal 1.2 m, Vertical 1.9mDGNSS Accuracy: Horizontal 0.4m, Vertical 0.7 mRTK Accuracy: Horizontal 0.6 cm+0.5 ppmVertical 1 cm+1 ppm |
| Velocity Accuracy |
3 cm/s |
| Heading Accuracy |
At 1 m antenna separation, heading accuracy: 0.15°At 5m antenna separation, heading accuracy: 0.03° |
| Max Update Rate |
20 Hz |
| RTK Initialization Time |
7s (baseline<40 km) |
| Time Accuracy Related |
PPS Resolution: 1.4 nsEvent Accuracy: <3nsCold Start Time: <35s(no Ephemeris, no Coarse Position)Hot Start Time: <10s(with Ephemeris, with Coarse Position)Re-Acquisition Time: 1s |
| Tracking and Acquisition Threshold |
Tracking Threshold: 20 dB/HzAcquisition Threshold: 30 dB/Hz |
| Built-in Magnetometer |
RM3100 |
| Measurement Range |
±1100μT(wide dynamic magnetic field adaptation) |
| Resolution |
13 nT@200 Cycle Count; Detection Sensitivity 2.7 nT at 1Hz |
| Noise Level |
15nT@200 Cycle Count; Noise Floor 4pT/√ Hz(1Hz) |
| Linearity |
0.50% within ±200μT |
| Protocol |
DroneCAN |
| Communication Rate |
1 Mbit/s(CAN)8 Mbit/s(CAN FD) |
| Upgrade Support |
Support |
| Firmware |
C-RTK3 M4C |
| Data Interface |
JST GH 1.254P/TYPE-C USB |
| Size |
55.5×50×16.5 mm [Includes screw holes] |
| Operating Temperature |
-10℃~+80℃ |
| Horizontal coverage angle |
360° |
| Polarization |
Right-hand circular polarization |
| Gain(dB) |
38±2 |
| Connector type |
SMA-J |
| Antenna size |
Φ40*84.5 mm |
| Antenna weight |
36 g |
CUAV C-RTK 9Ps Positioning Module | High Precision GPS RTK GNSS Pixhawk
Yurtdışı Tedarik
Fiyat aralığı: 41,820.00 ₺ - 121,380.00 ₺| Ağırlık | 30 lbs |
|---|---|
| Tool Supplies |
Assembly Category |
| Upgrade Parts/Accessories |
GPS |
| RC Parts & Accs |
Servo Accessories |
| Size |
32*48*12mm |
| Compass |
IST8310 |
| Remote Control Peripherals/Devices |
GPS |
| Position Accuracy |
RTK:0.01m+1ppm CEPGPS:1.5m CEP;SBAS:1.0m CEP |
| RTK Surveyin-time |
RTK<60s |
| Radio Control Style |
RC Hobby |
| C-RTK 9Ps options |
Choose an optionRover unit stand comboBase unit comboRover unit stand unit and base unitcomboC-RTK 9Ps & Pixhawk V6X V2 ControllerC-RTK 9Ps & 7-Nano V2 ControllerClear |
| Receiver |
184 channelZED-F9P(ublox) |
| GNSS |
GPS、BDS、GALILEO、GLONASS |
| Concurrent GNSS |
4 |
| GNSS Bands |
GPS-L1C/A,GPS-L2C,GLONASS-L10F,GLONASS-L2OF,GALILEO-E1B/C,GALILEO-E5b,BDS-B11,BDS-B2I,QZSS-L1CIA,QZSS-L2C, |
| Nav.update rate |
RTK20Hz; RAW25Hz; PVT25Hz (The maximum limit is related to the concurrency setting) |
| Convergence Time |
RTK<60s |
| Acquisition |
Cold start<24sHot start<1s |
| Sensitivity |
Tracking and nav-167dBmCold start-148 dBmHot start-157 dBmReacquisition -160 dBm |
| Anti-jamming |
Active CW detection and removal, Onboard band pass filter |
| Anti-spoofing |
Advanced anti-spoofing algorithms |
| Antenna Gain |
Rover:2dBi Base:5dBi |
| PPK |
Not Support |
| GPS Heading |
Support(requirestwo C-RTK9Ps);heading accuracy:0.4edg(reference value) |
| Base/Rover Role Swap |
Support |
| UART |
2 UART |
| USB |
1 |
| Protocols |
NMEA、UBX binary、RTCM 3.x |
| Operating voltage |
4.5~6V |
| Operating Temperature |
-40～85℃ |
| Weight |
30g(Module Only) |
| Versiyon |
C-Rtk-9Ps-Options: Rover unit stand combo ,C-Rtk-9Ps-Options: Base unit combo ,C-Rtk-9Ps-Options: Rover unit stand unit and base unitcombo ,C-Rtk-9Ps-Options: C-RTK 9Ps & Pixhawk V6X V2 Controller ,C-Rtk-9Ps-Options: C-RTK 9Ps & 7-Nano V2 Controller |
CUAV C-RTK Expansion Module | USL Extension Integrator Safety Switch Buzzer LED Indicator For USB C-RTK Extension
Yurtdışı Tedarik
11,730.00 ₺ 14,076.00 ₺| USL C-RTK Extension module * 2Pcs |
V5+ version |
|---|---|
| Versiyon |
Usl-C-Rtk-Extension-Module-2Pcs: V5+ version |
CUAV CAN Babel Dual-function USB CAN Bus Adapter
Yurtdışı Tedarik
5,100.00 ₺ 6,120.00 ₺| Ağırlık | 7.7 lbs |
|---|---|
| Weight |
7.7g |
| Dimensions |
10 × 10 × 5 cm |
| Processor |
STM32F373CCT6 |
| UART Baud Rate |
2400bps~921600bps |
| CAN |
2 |
| USART |
1 |
| Operating Voltage |
4.75V~5.25V |
| Operating Temperature |
-40℃~+85℃ |
| Size |
36mm*28mm*10.5mm |
CUAV CAN PDB Multifunctional Drone Controller Baseboard
Yurtdışı Tedarik
Fiyat aralığı: 16,320.00 ₺ - 99,960.00 ₺| Ağırlık | 200 lbs |
|---|---|
| Set |
CAN PDB Only, CAN PDB With V5+ Core, CAN PDB With X7+ Core, CAN PDB With X7+ Pro Core |
| Material |
Metal |
| Upgrade Parts/Accessories |
Flight controller |
| RC Parts & Accs |
Speed controller |
| Size |
89*42.5*33mm |
| Use |
Vehicles & Remote Control Toys |
| Technical parameters |
KV1100 |
| Remote Control Peripherals/Devices |
Remote Controller |
| Four-wheel Drive Attributes |
Battery |
| MCU |
STM32F412(32 Bit Arm® Cortex®-M4, 100MHz, 512KB FLASH, 256KB RAM) |
| Operating Voltage |
14 ~ 62V（4 ~ 15S Lipo) |
| Detection Current Range |
0 ~ 110A |
| Output Power(MAX) |
6000W（last 120s） |
| Stable Output Power(MAX) |
5500W |
| Core |
V5+ / X7+ / X7+ Pro CORE |
| Frame Type |
Plane/VTOL/Copter/Heli/Rover/Sub |
| Controller Firmware |
ArduPilot 4.0.0 and above firmwarePX4 1.11.0 and above firmware |
| Operating Temperature |
-20 ~ 100℃ |
| V_OUT |
5V(default)/7.4V/8.2V(4A） |
| Servo VCC |
5V(default)/7.4V/8.2V(8A） |
| 12V OUT |
4A(max) |
| USB |
1 |
| UART1 |
5(GPS/UART4/TELEM1/TELEM2/DEBUG) |
| CAN |
2 |
| I2C |
3 |
| SBUS/DSM IN |
1 |
| PPM IN |
1 |
| Servo |
14 |
| ADC3.3 |
1 |
| ADC6.6 |
1 |
| SBUS Outs |
1(This interface is invalid when using X7+/X7+pro core) |
| RSSI |
3.3V(Analog input) |
| DSU7 |
1 |
| Weight |
200g (including cable) |
| Wire Length |
30cm |
| Versiyon |
Set: CAN PDB Only ,Set: CAN PDB With V5+ Core ,Set: CAN PDB With X7+ Core ,Set: CAN PDB With X7+ Pro Core |